Cylinder Liner - Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
B | 2P-8260 | Cylinder Liner Installation Group | 1 |
C | 5P-3975 | Rubber Lubricant | - |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Apply Tooling (C) to the new liner seal (2). Install liner seal (2) in the machined groove on cylinder liner (1).
- Position cylinder liner (1) in the cylinder block. Use Tooling (B) to press the cylinder liner in place.
Note: Refer to the Testing and Adjusting, "Cylinder Liner Projection" topic in order to check the cylinder liner projection.
Show/hide table
Illustration 1 | g01143829 |
End By:
- Install the pistons and connecting rods. Refer to Disassembly and Assembly, "Piston and Connecting Rods - Install".
Caterpillar Information System:
3054 and 3056 Industrial and Generator Set Engines Overhaul Considerations
349F and 352F Excavators Machine System Specifications Oil Filter (Return)
G3408C and G3412C Engines Piston Cooling Jets - Remove and Install
G3500 Generator Sets Plate Locations and Film Locations
3126B Engines Air Inlet and Exhaust System
3500B High Displacement Air Inlet and Exhaust Lines
G3408C and G3412C Engines Cylinder Head - Install
Product Identification Numbers (PIN) Location Guide Asphalt Screed
3412C Engine Engine Oil Lines
G3408C and G3412C Engines Cylinder Head - Remove
3412C Engine Engine Oil Cooler
3412C Engine Engine Support (Front)
G3408C and G3412C Engines Air Cleaner Housing - Remove and Install
Product Identification Numbers (PIN) Location Guide General Information
Product Identification Numbers (PIN) Location Guide Types of Identification Numbers
Product Identification Numbers (PIN) Location Guide Types of Labels and Plates
3412C Engine Crankshaft - Install
SPS342 Skid Mounted Pumper Plate Locations and Film Locations
3412C Engine Pistons and Connecting Rods - Disassemble
3126B Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
3126B Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove - If Equipped
3412E, C30 and C32 Marine Engines Camshaft - Remove
3412E, C30 and C32 Marine Engines Camshaft - Install
3500B Engines Turbocharger