Electronic Control Module (ECM) - Flash Program
执行下述程序,对 ECM 进行闪存编程。 更新软件时需要对 ECM 进行闪存编程。 如果更换了 ECM,也必须对 ECM 进行闪存编程。 Caterpillar 电子技师(ET)含有 WinFlash 程序。 WinFlash 用来将软件加载到 ECM 中。 下述步骤用于将软件闪存到 ECM 中。
- 步骤
- 连接通信适配器与电子技师之间的数据链路电缆。
- 连接通信适配器与机器的诊断接头之间的数据链路电缆。
- 将断路开关和钥匙起动开关转到接通位置。
- 将机具锁定装置设置到锁定位置。
- 确保变速箱方向开关处于空档位置。
- 确保发动机没有在运转。
- 使用 WinFlash 加载软件。
Caterpillar Information System:
3126B Engines Engine Speed - Check
3612 and 3616 Engines Engine Oil Filters
3612 and 3616 Engines Engine Oil Coolers and Temperature Regulators
3612 and 3616 Engines Centrifugal Oil Filters
723PLUS Digital Speed Control Initial Adjustments
3176C and 3196 Industrial Engines Alternator and Regulator
2000/06/01 New Pump Group With Improved Internal Sealing Used In Hydrax System {1289}
3126E Truck Engine Pistons and Connecting Rods - Remove
723PLUS Digital Speed Control Conclusion of Setup Procedures
3612 and 3616 Engines Turbocharger
3612 and 3616 Engines Fuel System Operation
3126E Truck Engine Flywheel - Install
3408E and 3412E Engines for Caterpillar Built Machines Gear Group (Front) - Time
3612 and 3616 Engines Internal Lubrication
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Starting Aid Switch Circuit - Test
P16, P20, P25, P28, P40 and P60 Pulverizers Rotary Manifold - Assemble
3500B High Displacement Locomotive Engines Air Inlet and Exhaust Lines
3612 and 3616 Engines Piston Cooling Jets
3408E and 3412E Engines for Caterpillar Built Machines Water Pump - Test
Uninterruptible Power Supply (UPS) 250 System Description
3612 and 3616 Engines Lubrication System Operation
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Service Brake Pedal Position (Switch 2) Circuit - Test
2000/03/20 New 12 Volt AM/FM Radios Are Available {7338}
320B, 320B L, 320B LN, 322B L and 322B LN Excavators Supplement Bucket Linkage - Lubricate