Articulated Hitch
Show/hide table
Illustration 1 | g02680798 |
Upper Hitch
Show/hide table
Illustration 2 | g02680799 |
Section B-B |
Show/hide table
Specification for 112-6953 Articulating Hitch Gp     | |||
Item     | Qty     | Part     | Specification Description     |
1     | 1     | 127-6514 Shim Pack     | As required, use the shim.     |
Thickness of the shim pack is 2.50 ± 0.08 mm (0.098 ± 0.003 inch). | |||
2     | 2     | 3K-2876 Lip Type Seal     | Lubricate the sealing lip lightly with the lubricant that is being sealed.     |
3     | 1     | 118-8267 Pin As     | Diameter is 69.940 ± 0.015 mm (2.7535 ± 0.0006 inch).     |
-     | -     | -     | Lubricate all bores with Loctite C5A copper antiseize.     |
Lower Hitch
Show/hide table
Illustration 3 | g02680800 |
Section C-C |
Show/hide table
Specification for 112-6953 Articulating Hitch Gp     | |||
Item     | Qty     | Part     | Specification Description     |
4     | 1     | 118-8271 Pin     | Diameter is 82.6 mm (3.25 inch)     |
-     | As required, use the following shims.     | ||
5     | 1     | 118-8275 Shim Pack     | Thickness of the shim pack is 2.10 ± 0.08 mm (0.083 ± 0.003 inch).     |
6     | 1     | 118-8276 Shim Pack     | Thickness of the shim pack is 2.50 ± 0.08 mm (0.098 ± 0.003 inch).     |
7     | 2     | 5K-0983 Lip Type Seal     | Lubricate lightly with the lubricant that is being sealed.     |
8     | 2     | 106-4175 Bolt     | Torque to 570 ± 80 N·m (420 ± 59 lb ft).     |
Caterpillar Information System:
574B Forwarder Towing the Machine
574B Forwarder Brake Discs - Check
216, 226, 232 and 242 Skid Steer Loaders Machine Systems Pilot Operated Hydraulic Control - Disassemble
2002/09/30 Correction to Disassembly and Assembly , "Compensating Cylinder" {5816}
IT28G Integrated Toolcarrier and 928G Wheel Loader Hydraulic System Hydraulic Oil Contamination - Test
IT28G Integrated Toolcarrier and 928G Wheel Loader Hydraulic System Pilot Oil Accumulator - Test and Charge
R1700G Load Haul Dump Joystick Control
2002/06/17 Bushings for the Grapple and the Grapple Cylinder are Now Available {6307}
2002/08/12 Manual Retraction of the Hydraulic Coupler Pins {6129}
Field Installation of the 223-8416 Installation Arrangement (Air Conditioner Conversion) {7304, 7320} Field Installation of the 222-5722 Installation Arrangement (Air Conditioner and Heater) {7304, 7320}
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill Compactor Power Train MID 081 - CID 1693 - FMI 13
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill Compactor Power Train MID 081 - CID 1693 - FMI 04
3056E Industrial Engine Air Inlet Heater - Test
2002/07/01 Improved Track Press Tools are Available for Positive Pin Retention Track {4150}
928H and 928HZ Wheel Loader Steering System System Pressure - Release
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers 5 Volt Engine Pressure Sensor Supply Circuit - Test
2002/07/01 Thread Lock Compound and a New Torque is Used on the Bolt for the Front Drive Shaft {3253}
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Engine Pressure Sensor Open or Short Circuit - Test
Machine Security System MID 124 - CID 0168 - FMI 00
Machine Security System MID 124 - CID 0168 - FMI 01
Machine Security System MID 124 - CID 0248 - FMI 12
Machine Security System MID 124 - CID 0817 - FMI 04
Machine Security System MID 124 - CID 1391 - FMI 03
Machine Security System MID 124 - CID 1391 - FMI 04