Correction to Disassembly and Assembly , "Compensating Cylinder" {5816}
- Telehandler:
- TH62 (S/N: 4TM1-4013)
- TH62 (S/N: 3LN1-UP)
- TH63 (S/N: 5WM1-6020)
- TH63 (S/N: 3NN1-UP)
- TH82 (S/N: 3JN1-1509)
- TH82 (S/N: 3KN1-UP)
- TH83 (S/N: 3RN1-4014)
- TH103 (S/N: 3PN1-2026)
This article corrects the article that was published on 22July 2002. This article corrects the effectivity.
The torque specifications for the piston and the end cap have been updated.
Step 8 in "Assemble Compensating Cylinder" has an incorrect torque for the piston rod assembly. The correct torque is 710 N·m (524 lb ft).
Step 11 in "Assemble Compensating Cylinder" has an incorrect torque for the end cap assembly. The correct torque is 350 N·m (258 lb ft).
Caterpillar Information System:
IT28G Integrated Toolcarrier and 928G Wheel Loader Hydraulic System Hydraulic Oil Contamination - Test
IT28G Integrated Toolcarrier and 928G Wheel Loader Hydraulic System Pilot Oil Accumulator - Test and Charge
R1700G Load Haul Dump Joystick Control
2002/06/17 Bushings for the Grapple and the Grapple Cylinder are Now Available {6307}
2002/08/12 Manual Retraction of the Hydraulic Coupler Pins {6129}
Field Installation of the 223-8416 Installation Arrangement (Air Conditioner Conversion) {7304, 7320} Field Installation of the 222-5722 Installation Arrangement (Air Conditioner and Heater) {7304, 7320}
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill Compactor Power Train MID 081 - CID 1693 - FMI 13
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill Compactor Power Train MID 081 - CID 1693 - FMI 04
RM-350B Road Reclaimer/Soil Stabilizer Machine Systems Transmission Hydraulic Control (Rotor) - Remove and Install
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill Compactor Power Train MID 081 - CID 1693 - FMI 03
IT28G Integrated Toolcarrier and 928G Wheel Loader Hydraulic System Tilt Cylinder
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill Compactor Power Train MID 081 - CID 1693 - FMI 01
216, 226, 232 and 242 Skid Steer Loaders Machine Systems Pilot Operated Hydraulic Control - Disassemble
574B Forwarder Brake Discs - Check
574B Forwarder Towing the Machine
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Steering System Articulated Hitch
3056E Industrial Engine Air Inlet Heater - Test
2002/07/01 Improved Track Press Tools are Available for Positive Pin Retention Track {4150}
928H and 928HZ Wheel Loader Steering System System Pressure - Release
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers 5 Volt Engine Pressure Sensor Supply Circuit - Test
2002/07/01 Thread Lock Compound and a New Torque is Used on the Bolt for the Front Drive Shaft {3253}
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Engine Pressure Sensor Open or Short Circuit - Test
Machine Security System MID 124 - CID 0168 - FMI 00
Machine Security System MID 124 - CID 0168 - FMI 01