Bushings for the Grapple and the Grapple Cylinder are Now Available {6307}
- Forwarders:
- 554 (S/N: 1AM1-UP)
- 574 (S/N: 1FM1-UP)
Bushings are now available to service the grapple and the grapple cylinders on forwarders. The bushings will improve the serviceability of the machines that are listed.
Show/hide table
Illustration 1 | g00898491 |
Show/hide table
Bushings     | ||
Item     | Part Number     | Description     |
1     | 219-7733     | Bushing (1)     |
2     | 219-7732     | Bushing (2)     |
Show/hide table
( 1 ) | The bushing includes 1 seal. |
( 2 ) | The bushing includes 2 seals. |
Caterpillar Information System:
2002/08/12 Manual Retraction of the Hydraulic Coupler Pins {6129}
Field Installation of the 223-8416 Installation Arrangement (Air Conditioner Conversion) {7304, 7320} Field Installation of the 222-5722 Installation Arrangement (Air Conditioner and Heater) {7304, 7320}
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill Compactor Power Train MID 081 - CID 1693 - FMI 13
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill Compactor Power Train MID 081 - CID 1693 - FMI 04
RM-350B Road Reclaimer/Soil Stabilizer Machine Systems Transmission Hydraulic Control (Rotor) - Remove and Install
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill Compactor Power Train MID 081 - CID 1693 - FMI 03
IT28G Integrated Toolcarrier and 928G Wheel Loader Hydraulic System Tilt Cylinder
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill Compactor Power Train MID 081 - CID 1693 - FMI 01
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill Compactor Power Train MID 081 - CID 1693 - FMI 00
Air Conditioning and Heating R-12 All Caterpillar Machines Identifying the Air Conditioning System
216, 226, 232 and 242 Skid Steer Loaders Machine Systems Pilot Operated Hydraulic Control - Remove
PM-465 Cold Planer Lower Conveyor Belt (First Stage) Tension and Tracking - Adjust
R1700G Load Haul Dump Joystick Control
IT28G Integrated Toolcarrier and 928G Wheel Loader Hydraulic System Pilot Oil Accumulator - Test and Charge
IT28G Integrated Toolcarrier and 928G Wheel Loader Hydraulic System Hydraulic Oil Contamination - Test
2002/09/30 Correction to Disassembly and Assembly , "Compensating Cylinder" {5816}
216, 226, 232 and 242 Skid Steer Loaders Machine Systems Pilot Operated Hydraulic Control - Disassemble
574B Forwarder Brake Discs - Check
574B Forwarder Towing the Machine
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Steering System Articulated Hitch
3056E Industrial Engine Air Inlet Heater - Test
2002/07/01 Improved Track Press Tools are Available for Positive Pin Retention Track {4150}
928H and 928HZ Wheel Loader Steering System System Pressure - Release
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers 5 Volt Engine Pressure Sensor Supply Circuit - Test