Smooth Drum Scraper - Remove and Install
拆卸步骤
- 拆下螺栓 (2) 和刮刀 (1) 。
Show/hide table
 | |
| 图 1 | g00844007 |
安装步骤
- 松弛地安装刮刀 (1) 和螺栓 (2) 。 将尺寸 (X) 设定为 13 ± 2 mm (0.5 ± 0.08 in) 的间隙。 拧紧四个螺栓 (2) 。
Show/hide table
| | |
| 图 2 | g00844007 |
Show/hide table
 | |
| 图 3 | g00844010 |
Caterpillar Information System:
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Relief Valve (Primary Air Tank) - Remove and Install
PM-465 Cold Planer Track Tension - Check/Adjust
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems Cab - Remove
735 Articulated Truck Power Train Differential and Bevel Gear (Front and Rear) - Disassemble
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement Radiator and Fan Group - Remove
PM-465 Cold Planer Track Shoe Bolts - Tighten
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Crossover Relief Valve (Swing Cushion)
793C XQ Off-Highway Truck Fan Drive Hydraulic System Makeup Valve (Fan Motor)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems Lift Arms - Install
PM-465 Cold Planer Track Drive Planetary Oil Level - Check
3054 and 3056 Industrial and Generator Set Engines Water Pump - Inspect
TK1051 Track Feller Buncher Machine Systems Piston Pump (Saw) - Assemble
2001/11/19 Field Replacement of Remanufactured Starting Motors and Remanufactured Alternators {1405, 1453}
2001/12/24 A New Fan Drive/Steering Pump Improves the Service Life {4306, 5070}
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Check Valve (Primary Air Tank) - Remove and Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Air Tank (Primary) - Remove and Install
793C XQ Off-Highway Truck Fan Drive Hydraulic System Suction Fan
988G Wheel Loader Power Train Torque Converter and Pump Drive Housing
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems Cab - Install
2002/04/22 A New Bearing is Available for the Steering Cylinder {4303}
CP-433E, CS-423E and CS-433E Vibratory Compactors Machine Systems Bumper - Remove and Install - CS-423E and CS-433E
MT735, MT745, MT755 and MT765 Agricultural Tractors Engine Supplement Refrigerant Compressor - Remove and Install
3054 and 3056 Industrial and Generator Set Engines Automatic Timing Advance Unit - Test
PM-465 Cold Planer Rotor Coolant Level - Check