Track Drive Planetary Oil Level - Check
Show/hide table
 |
热油和热的部件可能会导致人身伤害。 不要让热油或热的部件与皮肤接触。 |
- 放置最终传动，使加注口塞 (1) 位于顶部。 检查塞堵 (2) 是否与地面平行并距顶部四分之一圈。 塞堵 (3) 将位于底部。 塞堵 (3) 在底部时可用作排放口。
Show/hide table
 | |
| 图 1 | g00843705 |
- 使机油有时间下降到齿轮减速器的底部。 拆卸检查塞 (2) 。
- 机油油位应位于加住口塞开口的底部。 拆下加注口塞 (1) 。 如果必要，将机油加入加注口塞 (1) 的开口，直至油位到达检查塞 (2) 的底部。
- 清洁加注口塞 (1) 并安装加注口塞 (1) 。
- 清洁加注口塞 (1) 并安装检查塞 (2) 。
- 重复步骤 1 至步骤 5 以检查其他最终传动中的机油油位。
Caterpillar Information System:
3054 and 3056 Industrial and Generator Set Engines Water Pump - Inspect
TK1051 Track Feller Buncher Machine Systems Piston Pump (Saw) - Assemble
CP-433E, CS-433E and CS433E Vibratory Soil Compactors Propel System Control Valve (Shift)
CB-634D Paving Compactor Backup Alarm - Test
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems Lift Arms - Remove
CB-634D Paving Compactor Parking Brake Manual Release
TK1051 Track Feller Buncher Machine Systems Piston Pump (Saw) - Disassemble
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement Hydraulic Oil Cooler - Remove and Install
CB-634D Paving Compactor Lifting and Tying Down the Machine
2001/12/17 Addition to Operation and Maintenance , "Final Drive Preload - Check" {1000, 7000, 7500, 7519}
CB-634D Paving Compactor Leaving the Machine
2001/12/03 Addition to Operation and Maintenance , "Final Drive Preload - Check" {1000, 7000, 7500, 7519}
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems Lift Arms - Install
793C XQ Off-Highway Truck Fan Drive Hydraulic System Makeup Valve (Fan Motor)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Crossover Relief Valve (Swing Cushion)
PM-465 Cold Planer Track Shoe Bolts - Tighten
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement Radiator and Fan Group - Remove
735 Articulated Truck Power Train Differential and Bevel Gear (Front and Rear) - Disassemble
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems Cab - Remove
PM-465 Cold Planer Track Tension - Check/Adjust
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Relief Valve (Primary Air Tank) - Remove and Install
CP-433E, CS-423E and CS-433E Vibratory Compactors Machine Systems Smooth Drum Scraper - Remove and Install
2001/11/19 Field Replacement of Remanufactured Starting Motors and Remanufactured Alternators {1405, 1453}
2001/12/24 A New Fan Drive/Steering Pump Improves the Service Life {4306, 5070}