Track Tension - Check/Adjust
Check Tension
Show/hide table
Illustration 1 | g00843937 |
The wear plate should only show slight signs of wear from normal operation. If the track is dragging across the wear plate and the track is causing excessive wear, tighten the track. If the track does not come in contact with the wear plate, loosen the track.
Adjust Tension
Loose Track Adjustment
Show/hide table
Grease is under high pressure. Grease coming out of the relief valve under pressure can penetrate the body causing injury or death. Do not watch the relief valve to see if grease is escaping. Watch the track or track adjustment cylinder to see if the track is being loosened. Loosen the relief valve only one turn. |
- Clean fitting (1) on the tensioner cylinder.
Show/hide table
Illustration 2 | g00843974 |
Show/hide table
Illustration 3 | g00843991 |
View of callout (1) in illustration 2 |
- Pump grease into fitting (1) until the track at the top is just touching wear plate (2) in Illustration 2.
Tight Track Adjustment
- Loosen relief valve (3). Do not exceed one full turn. Allow the track at the top to just touch the wear plate (2) in Illustration 2.
Show/hide table
Illustration 4 | g00844018 |
View of callout (1) in Illustration 2 |
Caterpillar Information System:
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems Cab - Remove
735 Articulated Truck Power Train Differential and Bevel Gear (Front and Rear) - Disassemble
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement Radiator and Fan Group - Remove
PM-465 Cold Planer Track Shoe Bolts - Tighten
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Crossover Relief Valve (Swing Cushion)
793C XQ Off-Highway Truck Fan Drive Hydraulic System Makeup Valve (Fan Motor)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems Lift Arms - Install
PM-465 Cold Planer Track Drive Planetary Oil Level - Check
3054 and 3056 Industrial and Generator Set Engines Water Pump - Inspect
TK1051 Track Feller Buncher Machine Systems Piston Pump (Saw) - Assemble
CP-433E, CS-433E and CS433E Vibratory Soil Compactors Propel System Control Valve (Shift)
CB-634D Paving Compactor Backup Alarm - Test
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Relief Valve (Primary Air Tank) - Remove and Install
CP-433E, CS-423E and CS-433E Vibratory Compactors Machine Systems Smooth Drum Scraper - Remove and Install
2001/11/19 Field Replacement of Remanufactured Starting Motors and Remanufactured Alternators {1405, 1453}
2001/12/24 A New Fan Drive/Steering Pump Improves the Service Life {4306, 5070}
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Check Valve (Primary Air Tank) - Remove and Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Air Tank (Primary) - Remove and Install
793C XQ Off-Highway Truck Fan Drive Hydraulic System Suction Fan
988G Wheel Loader Power Train Torque Converter and Pump Drive Housing
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems Cab - Install
2002/04/22 A New Bearing is Available for the Steering Cylinder {4303}
CP-433E, CS-423E and CS-433E Vibratory Compactors Machine Systems Bumper - Remove and Install - CS-423E and CS-433E
MT735, MT745, MT755 and MT765 Agricultural Tractors Engine Supplement Refrigerant Compressor - Remove and Install