Bumper - Remove and Install - CS-423E and CS-433E
拆卸步骤
- 将吊带和适当的起重机连接到保险杠 (1) 上。 拆下四个螺栓 (2) 和保险杠 (1) 。 保险杠的重量为 138 kg (305 lb)。
Show/hide table
 | |
| 图 1 | g00844072 |
安装步骤
- 将适当的起重机和吊带连接到保险杠 (1) 上。 安装保险杠 (1) 和四个螺栓 (2) 。
Show/hide table
| | |
| 图 2 | g00844072 |
- 松开四个螺栓 (4) 。 定位刮刀 (3) ，并将尺寸 (X) 设置为 13 ± 2 mm (0.5 ± 0.08 in) 的间隙，然后拧紧四个螺栓 (4) 。
Show/hide table
 | |
| 图 3 | g00844073 |
Caterpillar Information System:
2002/04/22 A New Bearing is Available for the Steering Cylinder {4303}
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems Cab - Install
988G Wheel Loader Power Train Torque Converter and Pump Drive Housing
793C XQ Off-Highway Truck Fan Drive Hydraulic System Suction Fan
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Air Tank (Primary) - Remove and Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Check Valve (Primary Air Tank) - Remove and Install
2001/12/24 A New Fan Drive/Steering Pump Improves the Service Life {4306, 5070}
2001/11/19 Field Replacement of Remanufactured Starting Motors and Remanufactured Alternators {1405, 1453}
CP-433E, CS-423E and CS-433E Vibratory Compactors Machine Systems Smooth Drum Scraper - Remove and Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Relief Valve (Primary Air Tank) - Remove and Install
PM-465 Cold Planer Track Tension - Check/Adjust
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems Cab - Remove
MT735, MT745, MT755 and MT765 Agricultural Tractors Engine Supplement Refrigerant Compressor - Remove and Install
3054 and 3056 Industrial and Generator Set Engines Automatic Timing Advance Unit - Test
PM-465 Cold Planer Rotor Coolant Level - Check
550B Wheel Harvester, 560B Wheel Harvester, 570B Wheel Harvester and 580B Wheel Harvester Hydraulic System Piston Motor (Swing Drive)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement Radiator and Fan Group - Install
2001/11/26 An Improved Bracket Improves the Position of the Left Armrest {7307, 7312}
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement Engine Compartment Shield - Remove and Install
735 Articulated Truck Power Train Differential and Bevel Gear (Front and Rear) - Assemble
2001/12/03 New Hoist Cylinder Improves the Service Life of the Cylinder and the Seal {5102}
2001/12/10 A New Kit is Available for use on Turbocharged 3054 Engines for C Series and D Series Backhoe Loaders. {1058}
834G Wheel Dozer and 836G Landfill Compactor Power Train Autoshift Control
550B Wheel Harvester, 560B Wheel Harvester, 570B Wheel Harvester and 580B Wheel Harvester Power Train Travel Motor