Pilot Valve (Joystick)
Show/hide table
 | |
| Illustration 1 | g00889173 |
187-0521 Pilot Valve (Joystick) The parts (A) are located in the port (3) . The parts (B) are located in the ports (1), (2), and (4) . | |
(1) Port (1) connects to the pilot oil port for work port "A" on the lift control valve.
(2) Port (2) connects to the pilot oil port for work port "A" on the tilt control valve.
(3) Port (3) connects to the pilot oil port for work port "B" on the lift control valve.
(4) Port (4) connects to the pilot oil port for work port "B" on the tilt control valve.
(5) Port (5) is the supply port for the pilot valve.
(6) Port (6) drains to the tank.
(7) Torque for the nut ... 30.0 ± 3.0 N·m (22.00 ± 2.00 lb ft)
Caterpillar Information System:
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train Oil Filter (Power Train)
2002/01/21 A New Quick Coupler is Required to Extend the Service Life of Dual Purpose Valves {6129, 7542}
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System CID 0168 FMI 01 Electrical System Voltage Below Normal Range - Test
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Auxiliary)(Loader)(Pilot Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Auxiliary)(Loader) (Mechanically Operated)
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders Tire Inflation - Check
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Auxiliary)(Loader) (Mechanically Operated)
2001/10/29 The Torque Has Been Increased For The Bolts That Fasten The Stub Shafts To The Engine Cylinder Block {1237}
2001/10/22 A New Crankshaft Pulley is used on the Engine Crankshaft {1205}
3408E and 3412E Engines for Caterpillar Built Machines Diagnostic Codes
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0687 - FMI 02
CP-433C, CS-431C and CS-433C Paving Compactors Engine Starting
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train Output Transfer Gears
735 Articulated Truck Power Train Rear Axle - Remove
TH210 and TH215 Telehandlers Power Train General Information
2001/11/26 Puller Holes Have Been Added to Gear Assemblies for the Transmission {3061}
2001/11/12 Corrections to Disassembly and Assembly , "Inlet and Exhaust Valve Guides - Remove and Install" {1104}
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System System Power
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train Fixed Axle and Oscillating Axle
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System CID 0190 FMI 02 Speed Sensor (Engine) Incorrect Signal - Test
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Machine Does Not Move
3408E and 3412E Engines for Caterpillar Built Machines Aftercooler - Remove
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Four)(Mechanically Operated)
3408E and 3412E Engines for Caterpillar Built Machines Aftercooler - Install