A New Crankshaft Pulley is used on the Engine Crankshaft {1205}
- Off-Highway Truck:
- 777D (S/N: 3PR; AGC)
Description of Change: A new engine crankshaft pulley is used on the 3508 Engines that power the 777D Off-Highway Trucks in the list above. The grooves in the new pulley have been improved in order to minimize belt slippage. This will help increase the service life of the belts.
Show/hide table
 | |
| Illustration 1 | g00835710 |
This illustration shows the location of the new pulley. (1) 205-4808 Crankshaft Pulley (A) Front face of the cylinder block (B) Crankshaft Damper | |
Adaptable To: The 205-4808 Crankshaft Pulley is a direct replacement for the former 8N-6562 Crankshaft Pulley in the 122-3219 Crankshaft Pulley Gp .
The 205-4808 Crankshaft Pulley is effective with S/N:AGC819-820, 824 and 863-UP
. The new pulley is adaptable to (S/N: 3PR1-UP; AGC1-818).
Caterpillar Information System:
3408E and 3412E Engines for Caterpillar Built Machines Diagnostic Codes
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0687 - FMI 02
CP-433C, CS-431C and CS-433C Paving Compactors Engine Starting
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System CID 0091 FMI 09 Position Sensor (Throttle) Abnormal Update - Test
PM-465 Cold Planer Water Spray System - Drain
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Hydraulic and Steering System Joystick Control (Backhoe)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Joystick Control (Backhoe)
3408E and 3412E Engines for Caterpillar Built Machines Alternator - Remove and Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Hydraulic Hand Control (Backhoe)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Hydraulic Hand Control (Backhoe)
2001/11/12 The Rear Glass for the Cab has Changed {7301, 7310}
3408E Engine Supplement for 769D Off-Highway Trucks and 771D Off-Highway Quarry Trucks Exhaust Manifold - Remove and Install
2001/10/29 The Torque Has Been Increased For The Bolts That Fasten The Stub Shafts To The Engine Cylinder Block {1237}
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Auxiliary)(Loader) (Mechanically Operated)
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders Tire Inflation - Check
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Auxiliary)(Loader) (Mechanically Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Auxiliary)(Loader)(Pilot Operated)
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System CID 0168 FMI 01 Electrical System Voltage Below Normal Range - Test
2002/01/21 A New Quick Coupler is Required to Extend the Service Life of Dual Purpose Valves {6129, 7542}
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train Oil Filter (Power Train)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Pilot Valve (Joystick)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train Output Transfer Gears
735 Articulated Truck Power Train Rear Axle - Remove
TH210 and TH215 Telehandlers Power Train General Information