Water Spray System - Drain
When freezing temperatures are expected, drain the water spray system. Drain the pump and the high pressure water pump, if equipped. Drain the system in order to prevent damage to components.
- Drain the water tank.
Show/hide table
 | |
| Illustration 1 | g00854308 |
- Remove the primary strainer.
Show/hide table
 | |
| Illustration 2 | g00883970 |
- Open three valves (1) .
Show/hide table
 | |
| Illustration 3 | g00835337 |
- Open valve (2) .
Show/hide table
 | |
| Illustration 4 | g00836019 |
- Open the valve behind the high pressure water pump (if equipped).
Show/hide table
 | |
| Illustration 5 | g00836192 |
- Connect the hose for high pressure spray to the quick disconnect fitting. Depress the pistol grip trigger on the spray gun.
Note: Turn on the pump for high pressure spray until the pump has cleared all of the water from the pump. Disconnect the hose for the high pressure spray. Drain the hose.
Show/hide table
 | |
| Illustration 6 | g00836242 |
- Open the drain on the water pump.
Note: The location of the water pump is on top of the rotor chamber.
Show/hide table
 | |
| Illustration 7 | g00836434 |
- Do not start the engine.
- Move the switch for the spray bar to the ON position in order to operate the solenoid valve for one minute. Return the switch to the OFF position.
Show/hide table
 | |
| Illustration 8 | g00836499 |
- Remove each spray nozzle from the holder. Hold the nozzle at the lowest possible level allowed by the hose. Drain any water from the hose.
Show/hide table
 | |
| Illustration 9 | g00836559 |
- Remove strainers (3) and (4) .
Show/hide table
 | |
| Illustration 10 | g00985739 |
Strainer for the standard water system | |
Show/hide table
 | |
| Illustration 11 | g00835393 |
Strainer for the high pressure water system (if equipped) | |
- Remove screen (5) from the housing for the strainer (6) .
Show/hide table
 | |
| Illustration 12 | g00836154 |
- Pour the water from the housing for the strainers. Reinstall the housing for the strainers.
- Store the strainers in a warm place.
Caterpillar Information System:
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Hydraulic and Steering System Joystick Control (Backhoe)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Joystick Control (Backhoe)
3408E and 3412E Engines for Caterpillar Built Machines Alternator - Remove and Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Hydraulic Hand Control (Backhoe)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Hydraulic Hand Control (Backhoe)
2001/11/12 The Rear Glass for the Cab has Changed {7301, 7310}
3408E Engine Supplement for 769D Off-Highway Trucks and 771D Off-Highway Quarry Trucks Exhaust Manifold - Remove and Install
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Hydraulic and Steering System Hydraulic Hand Control (Backhoe)
CP-433E, CS-423E and CS-433E Vibratory Compactors Machine Systems Hydraulic Oil Filter and Mounting (Propel and Vibratory) - Remove and Install
CP-433C, CS-431C and CS-433C Paving Compactors Final Drive Planetary (Drum) Oil Sample - Obtain - CS/CP-433C Machines Only
797 Off-Highway Truck Differential and Final Drive Oil Filter - Replace
CP-433C, CS-431C and CS-433C Paving Compactors Final Drive Planetary (Drum) Oil - Check - CS/CP-433C Machines Only
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System CID 0091 FMI 09 Position Sensor (Throttle) Abnormal Update - Test
CP-433C, CS-431C and CS-433C Paving Compactors Engine Starting
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0687 - FMI 02
3408E and 3412E Engines for Caterpillar Built Machines Diagnostic Codes
2001/10/22 A New Crankshaft Pulley is used on the Engine Crankshaft {1205}
2001/10/29 The Torque Has Been Increased For The Bolts That Fasten The Stub Shafts To The Engine Cylinder Block {1237}
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Auxiliary)(Loader) (Mechanically Operated)
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders Tire Inflation - Check
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Auxiliary)(Loader) (Mechanically Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Auxiliary)(Loader)(Pilot Operated)
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System CID 0168 FMI 01 Electrical System Voltage Below Normal Range - Test
2002/01/21 A New Quick Coupler is Required to Extend the Service Life of Dual Purpose Valves {6129, 7542}