Hydraulic Oil Filter and Mounting (Propel and Vibratory) - Remove and Install
拆卸步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件描述 | 数量 |
| ZZ | 6V-9509 | 端面密封螺塞 (13/16 - 16 螺纹) | 3 |
| 6V-9830 | 盖组件 (13/16 - 16 螺纹) | 3 | |
注: 维修数据：拆卸和安装中的工具 (ZZ) 将不在图示中列出。 显示这一工具是为了协助有经验的维修人员。
Show/hide table
 |
滚热的油或液压油的压力会对人员造成伤害。 发动机停机之后，液压油的压力仍会保留在液压系统里。 对液压系统进行维修之前，如果不事先释放压力，可能会造成严重伤害。 卸下液压系统的部件或管路时，确保所有的作业机具都已降到地面上，而且液压油温度已冷。 只能在发动机停机，并且加注口盖冷却到可以用徒手触摸时才能卸下加注口盖。 |
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修机器时，务必小心，确保用容器盛接流出的油液。 在打开任何舱室或解体任何储有液体的部件之前，要准备好合适的容器收集液体。 有关可提供予卡特彼勒机器的工具及适合于盛装油液的容器，请参阅专门出版物, NENG2500, "卡特彼勒工具及车间用品指南"。 根据当地法规处置所有液体。 |
注: 为便于安装，在所有管路、软管、导线和管子上做出识别标记。 插接好所有线路、软管和管路。 这将有助于防止液体泄漏和防止污染物进入系统。
- 将软管组件 (3) 从液压油滤清器底座 (2) 上断开。
Show/hide table
 | |
| 图 1 | g00834956 |
- 将螺栓 (1) 和液压油滤清器底座 (2) 从机器上拆下。
安装步骤
- 安装液压油滤清器底座 (2) 和螺栓 (1) 。
Show/hide table
| | |
| 图 2 | g00834956 |
- 将软管组件 (3) 连接到液压油滤清器底座上。
Caterpillar Information System:
CP-433C, CS-431C and CS-433C Paving Compactors Final Drive Planetary (Drum) Oil Sample - Obtain - CS/CP-433C Machines Only
797 Off-Highway Truck Differential and Final Drive Oil Filter - Replace
CP-433C, CS-431C and CS-433C Paving Compactors Final Drive Planetary (Drum) Oil - Check - CS/CP-433C Machines Only
CP-563C and CS-563C Vibratory Compactors Battery - Clean/Check
980G Series II Wheel Loader Power Train Bypass Switch (Power Train Oil Filter)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Hydraulic Hand Control (Backhoe)
CP-433C, CS-431C and CS-433C Paving Compactors Final Drive Planetary (Drum) Oil - Change - CS/CP-433C Machines Only
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0650 - FMI 02
CP-433C, CS-431C and CS-433C Paving Compactors Belts - Inspect/Adjust/Replace
TH350B, TH355B, TH360B and TH460B Telehandlers Transmission and Hydraulic System Oil - Change
TK1051 Track Feller Buncher Machine Systems Swivel - Remove
TH350B, TH355B, TH360B and TH460B Telehandlers Wheel Nut Torque - Check
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Hydraulic and Steering System Hydraulic Hand Control (Backhoe)
3408E Engine Supplement for 769D Off-Highway Trucks and 771D Off-Highway Quarry Trucks Exhaust Manifold - Remove and Install
2001/11/12 The Rear Glass for the Cab has Changed {7301, 7310}
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Hydraulic Hand Control (Backhoe)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Hydraulic Hand Control (Backhoe)
3408E and 3412E Engines for Caterpillar Built Machines Alternator - Remove and Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Joystick Control (Backhoe)
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Hydraulic and Steering System Joystick Control (Backhoe)
PM-465 Cold Planer Water Spray System - Drain
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System CID 0091 FMI 09 Position Sensor (Throttle) Abnormal Update - Test
CP-433C, CS-431C and CS-433C Paving Compactors Engine Starting
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0687 - FMI 02