 | |
| Illustration 1 | g00827195 |
164-1420 Hydraulic Hand Control Gp | |
(1) Torque for the locknut ... 30.0 ± 7.0 N·m (22.00 ± 5.00 lb ft)
(2) Torque for the nut ... 20.0 ± 5.0 N·m (15.00 ± 4.00 lb ft)
(3) Torque for the nut ... 20.0 ± 5.0 N·m (15.00 ± 4.00 lb ft)
(4) Torque for the nut ... 20.0 ± 5.0 N·m (15.00 ± 4.00 lb ft)
(5) Torque for the nut ... 20.0 ± 5.0 N·m (15.00 ± 4.00 lb ft)
(6) Torque for the locknut ... 30.0 ± 7.0 N·m (22.00 ± 5.00 lb ft)
(7) Torque the bolt through the bearings (9) and spacer (10). Then, bolt the bearings and the spacer to the tower assembly (11) with bolts (8).
(12) Torque for the locknut ... 30.0 ± 7.0 N·m (22.00 ± 5.00 lb ft)
(13) Before installation, apply 154-9731 Thread Lock Compound to the socket setscrew. Adjust the position of the coupler assembly so that the linkage rods are vertical and so that the linkage rods do not bind. Assemble the collar with 0.5 - 1 mm (0.0197 - 0.0394 inch) of side play.
(14) Torque for the nut ... 20.0 ± 5.0 N·m (15.00 ± 4.00 lb ft)
(15) Torque for the nut ... 20.0 ± 5.0 N·m (15.00 ± 4.00 lb ft)
(16) Torque for the locknut ... 30.0 ± 7.0 N·m (22.00 ± 5.00 lb ft)