Articulating and Oscillating Bearings - Lubricate
Articulating Bearings
The articulating bearings are located in the center of the machine.
Show/hide table
Illustration 1 | g00676300 |
There are two articulating bearings. One bearing is located on the rear frame above the pivot housing. The other bearing is located on the rear frame below the pivot housing.
Oscillating Bearings
The oscillating bearings are located in the center of the machine.
Show/hide table
Illustration 2 | g00676304 |
Lubricate the fitting on the front oscillating bearing. Lubricate the fitting on the rear oscillating bearing. One fitting is located on the left side of the pivot housing. One fitting is located at the top of the front plate.
Caterpillar Information System:
2001/11/12 Correction to Operation and Maintenance Manual , "Braking System - Test" {4282, 4284}
CP-433C, CS-431C and CS-433C Paving Compactors Capacities (Refill)
2001/12/17 Correction to the Disassembly and Assembly Manual for the Brake and Wheel Housing {4002}
CP-563C and CS-563C Vibratory Compactors Hydraulic Tank Vent - Replace
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System Service Tools
735, 740 and 740 EJECTOR Articulated Trucks Machine Systems Rear Suspension Frame - Install
TH103 Telehandler Hydraulic System Boom Hydraulic System
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System Detected Fault Mode
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0623 - FMI 02
2001/10/22 Correction to the Operation and Maintenance Manual , "Lubricant Viscosities" {7000, 7581}
2001/11/05 Correction to the Testing and Adjusting Manual for the Power Train {3065}
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0422 - FMI 02
CP-563C and CS-563C Vibratory Compactors Wheel Nuts - Tighten
TH350B, TH355B, TH360B and TH460B Telehandlers Wheel Nut Torque - Check
TK1051 Track Feller Buncher Machine Systems Swivel - Remove
TH350B, TH355B, TH360B and TH460B Telehandlers Transmission and Hydraulic System Oil - Change
CP-433C, CS-431C and CS-433C Paving Compactors Belts - Inspect/Adjust/Replace
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0650 - FMI 02
CP-433C, CS-431C and CS-433C Paving Compactors Final Drive Planetary (Drum) Oil - Change - CS/CP-433C Machines Only
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Hydraulic Hand Control (Backhoe)
980G Series II Wheel Loader Power Train Bypass Switch (Power Train Oil Filter)
CP-563C and CS-563C Vibratory Compactors Battery - Clean/Check
CP-433C, CS-431C and CS-433C Paving Compactors Final Drive Planetary (Drum) Oil - Check - CS/CP-433C Machines Only
797 Off-Highway Truck Differential and Final Drive Oil Filter - Replace