CP-563C and CS-563C Vibratory Compactors Caterpillar


Hydraulic Tank Vent - Replace

Usage:

CS-563C 4KN

  • Tilt the cab (if equipped) or tilt the platform forward. Refer to the Operation and Maintenance Manual, "Cab Tilting or Platform Tilting".

    Note: The vent is located on the top of the hydraulic oil tank.

  • Remove the vent on the hydraulic oil tank.

  • Install the new vent.

  • Lower the cab or the platform. Refer to the Operation and Maintenance Manual, "Cab Tilting or Platform Tilting".
  • Caterpillar Information System:

    768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System Service Tools
    735, 740 and 740 EJECTOR Articulated Trucks Machine Systems Rear Suspension Frame - Install
    TH103 Telehandler Hydraulic System Boom Hydraulic System
    768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System Detected Fault Mode
    914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0623 - FMI 02
    2001/10/22 Correction to the Operation and Maintenance Manual , "Lubricant Viscosities" {7000, 7581}
    2001/11/05 Correction to the Testing and Adjusting Manual for the Power Train {3065}
    914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0422 - FMI 02
    773E Off-Highway Truck/Tractor and 775E Quarry Truck Tire Shipping Pressure
    914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0421 - FMI 06
    914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0421 - FMI 05
    950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train Power Train Electronic Control System
    2001/12/17 Correction to the Disassembly and Assembly Manual for the Brake and Wheel Housing {4002}
    CP-433C, CS-431C and CS-433C Paving Compactors Capacities (Refill)
    2001/11/12 Correction to Operation and Maintenance Manual , "Braking System - Test" {4282, 4284}
    CP-433C, CS-431C and CS-433C Paving Compactors Articulating and Oscillating Bearings - Lubricate
    CP-563C and CS-563C Vibratory Compactors Wheel Nuts - Tighten
    TH350B, TH355B, TH360B and TH460B Telehandlers Wheel Nut Torque - Check
    TK1051 Track Feller Buncher Machine Systems Swivel - Remove
    TH350B, TH355B, TH360B and TH460B Telehandlers Transmission and Hydraulic System Oil - Change
    CP-433C, CS-431C and CS-433C Paving Compactors Belts - Inspect/Adjust/Replace
    914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0650 - FMI 02
    CP-433C, CS-431C and CS-433C Paving Compactors Final Drive Planetary (Drum) Oil - Change - CS/CP-433C Machines Only
    416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Hydraulic Hand Control (Backhoe)
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.