Correction to the Disassembly and Assembly Manual for the Brake and Wheel Housing {4002}
- Motor Grader:
- 16H (S/N: 6ZJ1-UP)
- Place retainer (2) in position on the wheel spindle without shims (25). Install bolts (1). Rotate the housing and tighten the bolts to a torque of 82 N·m (60.5 lb ft). Remove the bolts and the retainer. Measure the distance between the end of the sprocket and the wheel spindle. Subtract 0.51 to 0.64 mm (0.020 to 0.025 inch) from the measured distance. Install the retainer and the appropriate number of shims in order to equal the calculated distance. Refer to the appropriate Specification manual for the correct part numbers of the shims. Install bolts (1) that secure retainer (2) on the wheel spindle. Tighten the bolts to a torque of 460 ± 20 N·m (340 ± 15 lb ft). Install the wire on bolts (1) .
Caterpillar Information System:
CP-563C and CS-563C Vibratory Compactors Hydraulic Tank Vent - Replace
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System Service Tools
735, 740 and 740 EJECTOR Articulated Trucks Machine Systems Rear Suspension Frame - Install
TH103 Telehandler Hydraulic System Boom Hydraulic System
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System Detected Fault Mode
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0623 - FMI 02
2001/10/22 Correction to the Operation and Maintenance Manual , "Lubricant Viscosities" {7000, 7581}
2001/11/05 Correction to the Testing and Adjusting Manual for the Power Train {3065}
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0422 - FMI 02
773E Off-Highway Truck/Tractor and 775E Quarry Truck Tire Shipping Pressure
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0421 - FMI 06
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0421 - FMI 05
CP-433C, CS-431C and CS-433C Paving Compactors Capacities (Refill)
2001/11/12 Correction to Operation and Maintenance Manual , "Braking System - Test" {4282, 4284}
CP-433C, CS-431C and CS-433C Paving Compactors Articulating and Oscillating Bearings - Lubricate
CP-563C and CS-563C Vibratory Compactors Wheel Nuts - Tighten
TH350B, TH355B, TH360B and TH460B Telehandlers Wheel Nut Torque - Check
TK1051 Track Feller Buncher Machine Systems Swivel - Remove
TH350B, TH355B, TH360B and TH460B Telehandlers Transmission and Hydraulic System Oil - Change
CP-433C, CS-431C and CS-433C Paving Compactors Belts - Inspect/Adjust/Replace
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0650 - FMI 02
CP-433C, CS-431C and CS-433C Paving Compactors Final Drive Planetary (Drum) Oil - Change - CS/CP-433C Machines Only
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Hydraulic Hand Control (Backhoe)
980G Series II Wheel Loader Power Train Bypass Switch (Power Train Oil Filter)