Bank Valve (Four)(Mechanically Operated)
Show/hide table
 | |
| Illustration 1 | g00737092 |
180-8592 Bank Valve (Four) | |
(1) Stick control valve
(2) Bucket control valve
(3) Swing control valve
(4) Boom control valve
(5) Inlet
- Torque for the nuts ... 27.0 ± 3.0 N·m (20.00 ± 2.00 lb ft)
(6) Outlet
(7) Torque for the nuts ... 27.0 ± 3.0 N·m (20.00 ± 2.00 lb ft)
Note: Place three 4T-2723 Shims between the valve sections during assembly. Place one shim over each stud. The shims are necessary in order to prevent the spool from binding in the valve body.
Caterpillar Information System:
3408E and 3412E Engines for Caterpillar Built Machines Aftercooler - Remove
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Machine Does Not Move
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System CID 0190 FMI 02 Speed Sensor (Engine) Incorrect Signal - Test
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train Fixed Axle and Oscillating Axle
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System System Power
2001/11/12 Corrections to Disassembly and Assembly , "Inlet and Exhaust Valve Guides - Remove and Install" {1104}
2001/11/26 Puller Holes Have Been Added to Gear Assemblies for the Transmission {3061}
TH210 and TH215 Telehandlers Power Train General Information
735 Articulated Truck Power Train Rear Axle - Remove
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train Output Transfer Gears
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Pilot Valve (Joystick)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train Oil Filter (Power Train)
3408E and 3412E Engines for Caterpillar Built Machines Aftercooler - Install
950G Series II and 962G Series II Wheel Loaders and IT62G Series II Integrated Toolcarrier Power Train Parking Brake - Remove
950G Series II and 962G Series II Wheel Loaders and IT62G Series II Integrated Toolcarrier Power Train Parking Brake - Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Four)(Mechanically Operated)
797 Off-Highway Truck Engine Oil Pan Sump Screen - Inspect/Clean
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train Transmission Planetary
2006/08/14 Changes to the Steer Linkage Improve the Service Life {4305}
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Four)(Mechanically Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Four)(Mechanically Operated)
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System CID 0190 FMI 09 Speed Sensor (Engine) Abnormal Update - Test
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Four)(Mechanically Operated)
2001/10/22 Correction to Testing and Adjusting , "Transmission Pressures - Test and Adjust" {3030, 3030}