Parking Brake - Remove
Removal Procedure
Start By:
- Remove the center drive shaft. Refer to Disassembly and Assembly, RENR4311, "Drive Shaft (Center) - Remove and Install".
- Remove clevis pin (1). Disconnect yoke assembly (2) from the parking brake actuator lever (3) .
Show/hide table
Illustration 1 | g00447664 |
- Remove bolt (4) and parking brake actuator lever (3) .
- Remove eight bolts (5), the washers, and brake drum (6) .
Show/hide table
Illustration 2 | g00447703 |
- Remove bolt (8), yoke retainer (9), O-ring seal (7) and yoke (10) .
Show/hide table
Illustration 3 | g00447730 |
- Remove brake return springs (12), brace (11), brake retainer spring (14), brake adjuster (15) and brake shoes (13) .
Show/hide table
Illustration 4 | g00447806 |
- Remove four bolts (16) and plate assembly (17) .
Show/hide table
Illustration 5 | g00447831 |
- Remove the brake camshaft.
- Remove two nuts (18), the washers, and brake actuator mounting bracket (19) .
Show/hide table
Illustration 6 | g00447904 |
Caterpillar Information System:
3408E and 3412E Engines for Caterpillar Built Machines Aftercooler - Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Four)(Mechanically Operated)
3408E and 3412E Engines for Caterpillar Built Machines Aftercooler - Remove
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Machine Does Not Move
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System CID 0190 FMI 02 Speed Sensor (Engine) Incorrect Signal - Test
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train Fixed Axle and Oscillating Axle
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System System Power
2001/11/12 Corrections to Disassembly and Assembly , "Inlet and Exhaust Valve Guides - Remove and Install" {1104}
2001/11/26 Puller Holes Have Been Added to Gear Assemblies for the Transmission {3061}
TH210 and TH215 Telehandlers Power Train General Information
735 Articulated Truck Power Train Rear Axle - Remove
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train Output Transfer Gears
950G Series II and 962G Series II Wheel Loaders and IT62G Series II Integrated Toolcarrier Power Train Parking Brake - Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Four)(Mechanically Operated)
797 Off-Highway Truck Engine Oil Pan Sump Screen - Inspect/Clean
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train Transmission Planetary
2006/08/14 Changes to the Steer Linkage Improve the Service Life {4305}
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Four)(Mechanically Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Four)(Mechanically Operated)
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System CID 0190 FMI 09 Speed Sensor (Engine) Abnormal Update - Test
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Four)(Mechanically Operated)
2001/10/22 Correction to Testing and Adjusting , "Transmission Pressures - Test and Adjust" {3030, 3030}
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Four)(Mechanically Operated)
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Machine Operates in Only One Speed Range