Engine Oil Pump - Disassemble
开始:
- 拆卸发动机机油泵。 请参阅拆解和组装, "发动机机油泵 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
Show/hide table
所需工具 | |||
---|---|---|---|
工具 | 零件号 | 零件说明 | 数量 |
A | 1P-2321 | 拉拔器总成 | 1 |
B | 1P-0510 | 起子总成 | 1 |
- 拆下将齿轮 (2) 固定到轴上的螺栓 (1)。
Show/hide table
图 2 g00573420 - 利用工具 (A) 将齿轮 (2) 从轴上拆下。
Show/hide table
图 3 g00573424 - 将键 (3) 从轴上拆下。
Show/hide table
图 4 g00573427 典型实例 - 拆下四条螺栓和端盖 (4)。 拆下两条螺栓 (8) 和护圈 (7)。 将弹簧 (6) 和柱塞 (5) 从机油泵壳体上拆下。 检查柱塞 (5) 上的环。 更换损坏的环。
Show/hide table
图 5 g00573472 典型实例 - 如果端盖上配有轴承,利用工具 (B) 将两个轴承 (9) 从端盖 (4) 上拆下。
Show/hide table
图 6 g00573498 - 将两个轴组件 (10) 从机油泵体上拆下。
Show/hide table
图 7 g00573504 - 利用工具 (B) 将两个轴承 (12) 从机油泵体上拆下。 将两个定位销 (13) 机油泵体上拆下。
Show/hide table
图 1 | g00573401 |
Show/hide table
所需工具 | |||
---|---|---|---|
工具 | 零件号 | 零件说明 | 数量 |
A | 1P-2322 | 拉拔器组件 | 1 |
B | 1P-0510 | 起子总成 | 1 |
- 拆下将驱动齿轮 (1) 固定到轴上的螺栓和垫圈。
- 利用工具 (A) 拆下轴。 从轴上卸下键。 通过在泵上做好对准标记确保齿轮和轴的正确组装。
Show/hide table
图 9 g00523266 典型实例 - 将护圈 (3) 从旁通阀上拆下。 拆下弹簧和旁通阀。
- 将螺栓 (4) 从泵体上拆下。 拆下泵体 (2)。
- 利用工具 (B) 将轴承从泵体 (2) 上拆下。
Show/hide table
图 10 g00523267 - 拆下齿轮 (7)。 在齿轮上做好识别标记,以确保正确的安装。
- 将隔套 (6) 从主机油泵体 (5) 上拆下。 利用工具 (B) 将轴承从隔套 (6) 上拆下。
注: 检查隔套和轴承的状况。 如果隔套或轴承损坏,利用新零件加以更换。
- 将齿轮从主机油泵体 (5) 上拆下。
Show/hide table
图 11 g00523309 - 利用工具 (B) 将轴承从主机油泵体上拆下。
Show/hide table
图 8 | g00523264 |
典型实例 |
Caterpillar Information System:
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Extendable Stick/Auxiliary) (Mechanically Operated)
SR4 Generator with VR3 or VR4 Voltage Regulator Generator Operation
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pump - Install
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pump - Remove
966H and 972H Wheel Loaders Machine Systems Instrument Panel (Upper) - Install
SR4 Generator with VR3 or VR4 Voltage Regulator Component Descriptions
CP-563C and CS-563C Vibratory Compactors Plate Locations and Film Locations
966H and 972H Wheel Loaders Machine Systems Instrument Panel (Upper) - Remove
980G Wheel Loader Power Train Transmission Planetary - Disassemble
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader E053 Low Fuel Pressure Warning
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Hydraulic and Steering System Tilt Cylinder
CP-563C and CS-563C Vibratory Compactors Specifications
Evaluating the Conditions of Caterpillar Tires for Warranty Replacement{4203} Evaluating the Conditions of Caterpillar Tires for Warranty Replacement{4203}
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Damper - Lubricate
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Stick) (Pilot Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Boom) (Pilot Operated)
Assembly Instructions for the TL4 Series Soil Finisher{7960} Assembly Instructions for the TL4 Series Soil Finisher{7960}
966H and 972H Wheel Loaders Machine Systems Instrument Panel (Lower) - Remove
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
966H and 972H Wheel Loaders Machine Systems Instrument Panel (Lower) - Install
CP-563C and CS-563C Vibratory Compactors Seat
3176C, 3196 and 3406E Engines for Caterpillar Built Machines E096 High Fuel Pressure
3408E Engine Supplement for 769D Off-Highway Trucks and 771D Off-Highway Quarry Trucks Engine and Torque Converter - Remove
2001/10/15 New Tooling Is Available For The Assembly Of the Slack Adjusters {4261}