Engine Oil Pump - Remove
开始:
- 拆下发动机油底壳。 请参阅拆解和组装, "发动机油底壳 - 拆卸和安装"。
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
Show/hide table
| 注意 |
|---|
|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 将三条螺栓 (3) 从支架 (4) 上拆下。 拆下螺栓 (1)。 将喇叭口组件 (2) 从机油泵上拆下。
Show/hide table
图 2 g00573013 - 检查喇叭口组件 (2) 上的 O 形密封圈 (5)。 如果密封圈磨损或损坏，更换密封圈。
Show/hide table
图 3 g00573017 - 拆下固定管组件 (7) 和 (9) 的一条螺栓。 拆下管组件 (7) 和 (9)。 拆下三个螺栓 (6)。 拆下机油泵 (8)。
Show/hide table
图 4 g00573018 - 检查管组件 (9) 和 (7) 上的 O 形密封圈 (10) 和 (11)。 更换磨损或损坏的密封。
Show/hide table
| |
| 图 1 | g00572987 |
- 将螺母 (1) 和螺栓从喇叭口支撑上拆下。 拆下螺栓 (2) 和管组件 (3)。
Show/hide table
图 6 g00718991 - 将管组件 (4) 从机油泵上拆下。
- 检查管组件 (4) 上的 O 形密封圈。 如果密封圈磨损或损坏，更换密封圈。
Show/hide table
图 7 g00718998 - 拆下螺栓 (6)。 拆下喇叭口组件 (5)。
- 拆下三条螺栓 (7) 和机油泵 (8)。
Show/hide table
图 8 g00719014 - 检查喇叭口组件 (5) 上的 O 形密封圈 (9)。 如果密封圈磨损或损坏，更换密封圈。
Show/hide table
| |
| 图 5 | g00718987 |
Caterpillar Information System:
966H and 972H Wheel Loaders Machine Systems Instrument Panel (Upper) - Install
SR4 Generator with VR3 or VR4 Voltage Regulator Component Descriptions
CP-563C and CS-563C Vibratory Compactors Plate Locations and Film Locations
966H and 972H Wheel Loaders Machine Systems Instrument Panel (Upper) - Remove
980G Wheel Loader Power Train Transmission Planetary - Disassemble
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader E053 Low Fuel Pressure Warning
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Hydraulic and Steering System Tilt Cylinder
CP-563C and CS-563C Vibratory Compactors Specifications
PM-465 Cold Planer Battery or Battery Cable - Inspect/Replace
TH210 and TH215 Telehandlers Braking System Valve (Pilot Control)
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Glow Plugs - Remove and Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Tilt Cylinder
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pump - Install
SR4 Generator with VR3 or VR4 Voltage Regulator Generator Operation
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Extendable Stick/Auxiliary) (Mechanically Operated)
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pump - Disassemble
Evaluating the Conditions of Caterpillar Tires for Warranty Replacement{4203} Evaluating the Conditions of Caterpillar Tires for Warranty Replacement{4203}
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Damper - Lubricate
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Stick) (Pilot Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Boom) (Pilot Operated)
Assembly Instructions for the TL4 Series Soil Finisher{7960} Assembly Instructions for the TL4 Series Soil Finisher{7960}
966H and 972H Wheel Loaders Machine Systems Instrument Panel (Lower) - Remove
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
966H and 972H Wheel Loaders Machine Systems Instrument Panel (Lower) - Install