966H and 972H Wheel Loaders Machine Systems Caterpillar


Instrument Panel (Upper) - Remove

Usage:

966H A6D

拆卸步骤

开始:

  1. 连接转向机架锁。 请参阅拆解和组装, "转向机架锁 - 分离和连接"。

注: 在所有用于安装的导线和接头上做一个识别标记。




    图 1g00830801

  1. 将螺钉 (1) 从仪表板 (2) 上拆下。



    图 2g00830802

  1. 从仪表板 (2) 断开所有线束组件 (3) 。

    注: 线束组件的数量可能随机器配置变化。




    图 3g00830814

  1. 拆下仪表板 (2) 。



    图 4g00830816

  1. 拆下将仪表板 (4) 固定到位的螺钉 (5) 。



    图 5g00830820

  1. 断开管子组件 (6) 。



    图 6g00830821

  1. 断开线束组件 (7) 。



    图 7g00830835

  1. 拆下仪表板板 (4) 。



    图 8g00830836

  1. 从面板组件 (9) 拆下螺钉 (8) 。



    图 9g00830837

  1. 从面板组件 (9) 拆下螺钉 (10) 。



    图 10g00830838

  1. 从面板组件 (9) 断开线束组件 (11) 。

  1. 拆下面板组件 (9) 。

Caterpillar Information System:

980G Wheel Loader Power Train Transmission Planetary - Disassemble
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader E053 Low Fuel Pressure Warning
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Hydraulic and Steering System Tilt Cylinder
CP-563C and CS-563C Vibratory Compactors Specifications
PM-465 Cold Planer Battery or Battery Cable - Inspect/Replace
TH210 and TH215 Telehandlers Braking System Valve (Pilot Control)
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Glow Plugs - Remove and Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Tilt Cylinder
966H and 972H Wheel Loaders Machine Systems Window Wiper and Wiper Motor (Front) - Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Pressure Switch - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
3176C, 3196 and 3406E Engines for Caterpillar Built Machines CID 1582 FMI 04 Trans Lube Oil Temp Sensor short to ground
CP-563C and CS-563C Vibratory Compactors Plate Locations and Film Locations
SR4 Generator with VR3 or VR4 Voltage Regulator Component Descriptions
966H and 972H Wheel Loaders Machine Systems Instrument Panel (Upper) - Install
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pump - Remove
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pump - Install
SR4 Generator with VR3 or VR4 Voltage Regulator Generator Operation
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Extendable Stick/Auxiliary) (Mechanically Operated)
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pump - Disassemble
Evaluating the Conditions of Caterpillar Tires for Warranty Replacement{4203} Evaluating the Conditions of Caterpillar Tires for Warranty Replacement{4203}
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Damper - Lubricate
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Stick) (Pilot Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Boom) (Pilot Operated)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.