Plate Locations and Film Locations
The Product Information Number (PIN) is used to identify a powered machine that is designed for an operator to ride.
Products such as earthmoving equipment that are not designed for an operator to ride are identified by Serial Numbers. Also, most major attachments are identified by Serial Numbers.
For quick reference, record the identification numbers in the spaces below the illustrations.
Show/hide table
Illustration 1 | g00337727 |
Machine PIN____________________
Show/hide table
Illustration 2 | g00337727 |
Service Information Number (SIN)____________________
Show/hide table
Illustration 3 | g00341032 |
Engine information plate |
Engine Serial Number____________________
Show/hide table
Illustration 4 | g00337730 |
Governor information plate |
Governor Information Plate____________________
Caterpillar Information System:
966H and 972H Wheel Loaders Machine Systems Instrument Panel (Upper) - Remove
980G Wheel Loader Power Train Transmission Planetary - Disassemble
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader E053 Low Fuel Pressure Warning
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Hydraulic and Steering System Tilt Cylinder
CP-563C and CS-563C Vibratory Compactors Specifications
PM-465 Cold Planer Battery or Battery Cable - Inspect/Replace
TH210 and TH215 Telehandlers Braking System Valve (Pilot Control)
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Glow Plugs - Remove and Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Tilt Cylinder
966H and 972H Wheel Loaders Machine Systems Window Wiper and Wiper Motor (Front) - Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Pressure Switch - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
SR4 Generator with VR3 or VR4 Voltage Regulator Component Descriptions
966H and 972H Wheel Loaders Machine Systems Instrument Panel (Upper) - Install
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pump - Remove
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pump - Install
SR4 Generator with VR3 or VR4 Voltage Regulator Generator Operation
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Extendable Stick/Auxiliary) (Mechanically Operated)
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pump - Disassemble
Evaluating the Conditions of Caterpillar Tires for Warranty Replacement{4203} Evaluating the Conditions of Caterpillar Tires for Warranty Replacement{4203}
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Damper - Lubricate
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Stick) (Pilot Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Boom) (Pilot Operated)
Assembly Instructions for the TL4 Series Soil Finisher{7960} Assembly Instructions for the TL4 Series Soil Finisher{7960}