3408E and 3412E Engines for Caterpillar Built Machines Caterpillar


Engine Oil Pump - Install

Usage:

769C 01X

安装步骤


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损並縮短部件使用寿命。


1 型



    图 1g00573018

  1. 利用干净的机油或甘油润滑管组件 (9) 和 (7) 上的 O 形密封圈 (10) 和 (11)。


    图 2g00573017

  2. 将机油泵 (8) 安装到缸体上。 安装管组件 (7) 和 (9)。


    图 3g00573013

  3. 利用干净的机油或甘油润滑管组件 (2) 上的 O 形密封圈 (5)。


    图 4g00572987

  4. 将喇叭口组件 (2) 定位到机油泵内。 安装螺栓 (1)。

  5. 将支架 (4) 定位到管组件上后安装三条螺栓 (3)。

2 型



    图 5g00719014

  1. 利用干净的机油或甘油润滑管组件 (5) 上的 O 形密封圈 (9) 和管组件 (4) 上的 O 形密封圈。


    图 6g00718998

  2. 将机油泵 (8) 安装到缸体上。

  3. 安装喇叭口组件 (5)。


    图 7g00718991

  4. 安装管组件 (4)。


    图 8g00718987

  5. 安装管组件 (3)。 拆下螺栓和螺母 (1)。

结束:

  1. 安装发动机油底壳。 请参阅拆解和组装, "发动机油底壳 - 拆卸和安装"。

Caterpillar Information System:

3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pump - Remove
966H and 972H Wheel Loaders Machine Systems Instrument Panel (Upper) - Install
SR4 Generator with VR3 or VR4 Voltage Regulator Component Descriptions
CP-563C and CS-563C Vibratory Compactors Plate Locations and Film Locations
966H and 972H Wheel Loaders Machine Systems Instrument Panel (Upper) - Remove
980G Wheel Loader Power Train Transmission Planetary - Disassemble
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader E053 Low Fuel Pressure Warning
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Hydraulic and Steering System Tilt Cylinder
CP-563C and CS-563C Vibratory Compactors Specifications
PM-465 Cold Planer Battery or Battery Cable - Inspect/Replace
TH210 and TH215 Telehandlers Braking System Valve (Pilot Control)
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Glow Plugs - Remove and Install
SR4 Generator with VR3 or VR4 Voltage Regulator Generator Operation
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Extendable Stick/Auxiliary) (Mechanically Operated)
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pump - Disassemble
Evaluating the Conditions of Caterpillar Tires for Warranty Replacement{4203} Evaluating the Conditions of Caterpillar Tires for Warranty Replacement{4203}
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Damper - Lubricate
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Stick) (Pilot Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Boom) (Pilot Operated)
Assembly Instructions for the TL4 Series Soil Finisher{7960} Assembly Instructions for the TL4 Series Soil Finisher{7960}
966H and 972H Wheel Loaders Machine Systems Instrument Panel (Lower) - Remove
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
966H and 972H Wheel Loaders Machine Systems Instrument Panel (Lower) - Install
CP-563C and CS-563C Vibratory Compactors Seat
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.