966H and 972H Wheel Loaders Machine Systems Caterpillar


Instrument Panel (Upper) - Install

Usage:

966H A6D

安装步骤




    图 1g00830838

  1. 将线束组件 (11) 连接到面板组件 (9) 。

  1. 安装面板组件 (9) 。



    图 2g00830837

  1. 将螺钉 (10) 安装在面板组件 (9) 上。



    图 3g00830836

  1. 将螺钉 (8) 安装在面板组件 (9) 上。



    图 4g00830835

  1. 将仪表板 (4) 在驾驶室内放置到位。



    图 5g00830821

  1. 连接线束组件 (7) 。



    图 6g00830820

  1. 安装线束组件 (6) 。



    图 7g00830816

  1. 安装将仪表板 (4) 固定到位的螺钉 (5) 。



    图 8g00830814

  1. 将仪表板 (2) 在驾驶室内放置到位。



    图 9g00830802

  1. 将所有线束组件 (3) 连接到仪表板 (2) 。

    注: 线束组件的数量可能随机器配置变化。




    图 10g00830801

  1. 将螺钉 (1) 安装在仪表板 (2) 上。

End By: 分离转向机架锁。 请参阅 拆解和组装, "转向机架锁 - 分离和连接"。

Caterpillar Information System:

SR4 Generator with VR3 or VR4 Voltage Regulator Component Descriptions
CP-563C and CS-563C Vibratory Compactors Plate Locations and Film Locations
966H and 972H Wheel Loaders Machine Systems Instrument Panel (Upper) - Remove
980G Wheel Loader Power Train Transmission Planetary - Disassemble
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader E053 Low Fuel Pressure Warning
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Hydraulic and Steering System Tilt Cylinder
CP-563C and CS-563C Vibratory Compactors Specifications
PM-465 Cold Planer Battery or Battery Cable - Inspect/Replace
TH210 and TH215 Telehandlers Braking System Valve (Pilot Control)
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Glow Plugs - Remove and Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Tilt Cylinder
966H and 972H Wheel Loaders Machine Systems Window Wiper and Wiper Motor (Front) - Install
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pump - Remove
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pump - Install
SR4 Generator with VR3 or VR4 Voltage Regulator Generator Operation
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Extendable Stick/Auxiliary) (Mechanically Operated)
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pump - Disassemble
Evaluating the Conditions of Caterpillar Tires for Warranty Replacement{4203} Evaluating the Conditions of Caterpillar Tires for Warranty Replacement{4203}
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Damper - Lubricate
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Stick) (Pilot Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Boom) (Pilot Operated)
Assembly Instructions for the TL4 Series Soil Finisher{7960} Assembly Instructions for the TL4 Series Soil Finisher{7960}
966H and 972H Wheel Loaders Machine Systems Instrument Panel (Lower) - Remove
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.