Engine Oil Level - Check
Show/hide table
| NOTICE |
|---|
Do not under fill or overfill engine crankcase with oil. Either condition can cause engine damage. |
Show/hide table
 | |
| Illustration 1 | g00954742 |
550B and 560B | |
Show/hide table
 | |
| Illustration 2 | g00781457 |
570B and 580B | |
Open the rear engine hood. Engine oil dipstick (2) is located on the right side of the machine.
Show/hide table
 | |
| Illustration 3 | g00781684 |
Check the oil level on the dipstick while the engine is stopped. Maintain the oil level between mark (3) and mark (4). The oil level between mark (3) and mark (4) is known as the operating range.
Filler cap (1) is located near the fuel filters and the fan. If necessary, remove the filler cap and add oil. Clean the filler cap and install the filler cap.
Caterpillar Information System:
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Battery Disconnect Switch
AS2301 Screed Crown Control
735 Articulated Truck Suspension System - Purge
2001/12/17 Improved Track Pins, Bushings, Link Assemblies, and Track Groups Provide Better Resistance to Galling and Higher Reliability of the Track Joint {4170}
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Piston Pumps (Propel) - Install
143H and 163H Motor Graders All Wheel Drive Sequence Valve - Test and Adjust
69D and 769D Off-Highway Truck and 771D Quarry Truck Air System and Brakes Brake System Troubleshooting
69D and 769D Off-Highway Truck and 771D Quarry Truck Air System and Brakes Air Control Valve (Retarder)
550B, 560B, 570B and 580B Wheel Harvesters Engine Crankcase Breather - Clean
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System Relief Valve (Secondary Steering) - Test
TH103 Telehandler Hydraulic System Load Control Valve (Telescoping Cylinder)
140H and 160H Motor Graders Crankshaft Vibration Damper - Inspect
Procedure for the Removal of Bolts That Are Used for Shipping on Differentials {3258} Procedure for the Removal of Bolts That Are Used for Shipping on Differentials {3258}
2001/05/07 Operating Guidelines for Industrial Grapple Buckets {6704, 7000}
143H and 163H Motor Graders All Wheel Drive Solenoid Valve (Motor Displacement) - Test
2001/05/07 Correction to Operation and Maintenance Manuals, SEBU6868 and SEBU6869 for the Creeper Speed Control {3162}
143H and 163H Motor Graders All Wheel Drive Solenoid Valve (Charge) - Test
2001/03/19 New Seventeen Character Product Identification Number (PIN) {7557}
143H and 163H Motor Graders All Wheel Drive Solenoid Valve (All Wheel Drive) - Test
143H and 163H Motor Graders All Wheel Drive Solenoid Valve (Pump Pressure) - Test
735 and 740 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Steering System Pressure - Test
735 Articulated Truck Axle Breathers - Clean/Replace
C-9 Engine for Caterpillar Built Machines Electrical Power Supply Circuit - Test
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train Pinion and Differential (Drive and Steering Axle)(Rear) - Remove