735 Articulated Truck Caterpillar


Axle Breathers - Clean/Replace

Usage:

735 AWR
Parkir mesin pada tempat yang datar. Gerakkan alat kontrol rem parkir ke posisi TERPASANG. Turunkan bak dan matikan engine. Ganjal semua roda.

Pasang pengunci rangka kemudi. Gunakan petunjuk pada Buku Petunjuk Pengoperasian dan Perawatan, "Pengunci Rangka Kemudi".




Ilustrasi 1g00781670

Breather gandaran depan (1) terletak di rangka depan di atas gandaran depan.




Ilustrasi 2g00633489

Breather gandaran tengah (2) terletak di dalam manifold untuk oli pendinginan rem. Manifold terletak di rangka belakang di atas gandaran tengah.




Ilustrasi 3g00781678

Breather gandaran belakang (3) terletak di samping kanan rangka belakang di atas gandaran belakang.

Gunakan prosedur berikut untuk membersihkan breather.

    Catatan: Sebelum melepaskan breather, ganjal rangka depan mesin.

  1. Lepaskan masing-masing breather.

  1. Cuci masing-masing breather dalam pelarut yang bersih dan tidak mudah terbakar.

  1. Tiriskan masing-masing breather dan biarkan masing-masing breather menjadi kering.

  1. Pasang masing-masing breather.

Apabila ada dari breather gandaran yang telah rusak, ganti breather yang rusak.

Lepaskan pengunci rangka kemudi setelah semua breather gandaran telah terpasang. Gunakan petunjuk pada Buku Petunjuk Pengoperasian dan Perawatan, "Pengunci Rangka Kemudi".

Caterpillar Information System:

735 and 740 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Steering System Pressure - Test
143H and 163H Motor Graders All Wheel Drive Solenoid Valve (Pump Pressure) - Test
143H and 163H Motor Graders All Wheel Drive Solenoid Valve (All Wheel Drive) - Test
2001/03/19 New Seventeen Character Product Identification Number (PIN) {7557}
143H and 163H Motor Graders All Wheel Drive Solenoid Valve (Charge) - Test
2001/05/07 Correction to Operation and Maintenance Manuals, SEBU6868 and SEBU6869 for the Creeper Speed Control {3162}
143H and 163H Motor Graders All Wheel Drive Solenoid Valve (Motor Displacement) - Test
2001/05/07 Operating Guidelines for Industrial Grapple Buckets {6704, 7000}
Procedure for the Removal of Bolts That Are Used for Shipping on Differentials {3258} Procedure for the Removal of Bolts That Are Used for Shipping on Differentials {3258}
550B, 560B, 570B and 580B Wheel Harvesters Engine Oil Level - Check
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Battery Disconnect Switch
AS2301 Screed Crown Control
C-9 Engine for Caterpillar Built Machines Electrical Power Supply Circuit - Test
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train Pinion and Differential (Drive and Steering Axle)(Rear) - Remove
143H and 163H Motor Graders All Wheel Drive Accumulator (All Wheel Drive) - Test
143H and 163H Motor Graders All Wheel Drive Accumulator (All Wheel Drive) - Charge
550B, 560B, 570B and 580B Wheel Harvesters Engine Oil and Filter - Change
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258} Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train Pinion and Differential (Drive and Steering Axle)(Rear) - Disassemble
143H and 163H Motor Graders All Wheel Drive Service Record
735 Articulated Truck Cooling System Water Temperature Regulator - Replace
AP-1050B and BG-245C Asphalt Pavers Hydraulic System Oil Level - Check
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Swing Frame - Remove
AS2301 Screed Screed Cleanup
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.