2000/07/31 Caterpillar


Correction to Specifications, SENR3131 for the End Play of the Idler Shaft {3060}

Usage:

438 3DJ
Backhoe Loaders:
416 (PIN: 5PC1-UP)
426 (PIN: 7BC1-UP)
428 (PIN: 6TC1-UP)
436 (PIN: 5KF1-UP)
438 (PIN: 3DJ1-UP)
Specifications, SENR3131, "416, 426, 428, 436, 438, and Series II Backhoe Loaders Transmission". This module is part of Service Manuals, SENR3160 and SENR3475.

Item 2 is incorrect. Insert the following text.

(2) Shim the reverse idler shaft in order to obtain the following end play. ... 0.03 to 0.08 mm (0.001 to 0.003 inch)

Caterpillar Information System:

TH103 Telehandler Sound Information and Vibration Information
Road Analysis Control (RAC) For Off-Highway Truck/Tractors Normal Operation
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Trunnion Support (Oscillating Axle, Rear) - Remove and Install
3126B Engine for Caterpillar Built Machines CID 0248 FMI 09 Cat Data Link not communicating
550, 570 and 580 Wheel Harvesters Exhaust Ports - Inspect/Clean
3126B Engine for Caterpillar Built Machines Speed/Timing Sensor
416D Backhoe Loader Brake Reservoir Oil Level - Check
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Switches
TH62, TH63, TH82 and TH83 Telehandlers Braking System Service Brake
TH62, TH63, TH82 and TH83 Telehandlers Power Train Differential Lock Control
TH62, TH63, TH82 and TH83 Telehandlers Power Train Solenoid Valve (Transmission Clutch)
3126B Engine for Caterpillar Built Machines Fuel Pressure Sensor
2000/07/24 An Improved Center Drive Shaft Is Now Available {3253}
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks CID 0283 FMI 05 Filter Restrict Lamp open/short to +batt
2000/08/14 Improved Fuel Transfer Pump For Some 3003, 3013, 3014 and 3024 Engines {1256}
TH62, TH63, TH82 and TH83 Telehandlers Braking System Parking Brake
216 and 226 Skid Steer Loaders Machine Systems Hydraulic System Troubleshooting
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Sensors
424D, 428D and 438D Backhoe Loaders All Wheel Drive Control - If Equipped
Road Analysis Control (RAC) For Off-Highway Truck/Tractors Installation
Road Analysis Control (RAC) For Off-Highway Truck/Tractors Events
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Solenoid Valves
3126B Engine for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor
3126B Engine for Caterpillar Built Machines Turbocharger Inlet Pressure Sensor
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.