3126B Engine for Caterpillar Built Machines Caterpillar


Fuel Pressure Sensor

Usage:

120H 124



图 1g01068621

典型实例

(1) 压力传感器总成的最终安装扭矩 ... 10 ± 2 N·m (90 ± 18 lb in)

工作电压 ... 5.00 ± 0.25 VDC

工作温度 ... −40 到 125 °C (−40 到 257 °F)

Caterpillar Information System:

Road Analysis Control (RAC) For Off-Highway Truck/Tractors General Information
24H Motor Grader Tire Inflation Pressure Adjustment
834G Wheel Dozer and 836G Landfill Compactor Electrohydraulic System Relief Valve (Line) - Test and Adjust
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System Relief Valve (Main) - Test and Adjust
834G Wheel Dozer and 836G Landfill Compactor Electrohydraulic System Pressure Reducing Valve (Lowering Control) for Dead Engine Condition - Test and Adjust
834G Wheel Dozer and 836G Landfill Compactor Electrohydraulic System Torque Converter Stall and Implement Pump Double Stall - Test
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Measuring Wheel
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Glossary of Electrical Terms
3126B Engine for Caterpillar Built Machines CID 0041 FMI 04 8 Volt DC Supply short to ground
3054B Engine for Caterpillar Built Machines Electric Starting System - Test
C-12, C-15 and C-16 Engines for Caterpillar Built Machines CID 0041 FMI 03 8 Volt DC Supply short to +batt
TH62, TH63, TH82 and TH83 Telehandlers Braking System General Information
TH62, TH63, TH82 and TH83 Telehandlers Power Train Solenoid Valve (Transmission Clutch)
TH62, TH63, TH82 and TH83 Telehandlers Power Train Differential Lock Control
TH62, TH63, TH82 and TH83 Telehandlers Braking System Service Brake
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Switches
416D Backhoe Loader Brake Reservoir Oil Level - Check
3126B Engine for Caterpillar Built Machines Speed/Timing Sensor
550, 570 and 580 Wheel Harvesters Exhaust Ports - Inspect/Clean
3126B Engine for Caterpillar Built Machines CID 0248 FMI 09 Cat Data Link not communicating
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Trunnion Support (Oscillating Axle, Rear) - Remove and Install
Road Analysis Control (RAC) For Off-Highway Truck/Tractors Normal Operation
TH103 Telehandler Sound Information and Vibration Information
2000/07/31 Correction to Specifications, SENR3131 for the End Play of the Idler Shaft {3060}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.