Parking
Parkir pada tempat yang datar. Bila harus memarkir pada tanjakan, ganjal mesin.
Gunakan rem servis untuk menghentikan mesin. Gerakkan tuas kontrol transmisi ke posisi NETRAL.
Gerakkan tuas kontrol kecepatan ke posisi KECEPATAN TERENDAH.
Pasang rem parkir.
Pasang pengunci netral transmisi.
Turunkan semua tool kerja ke permukaan tanah.
Matikan engine.
Putar kunci kontak engine ke posisi MATI selama 4 detik.
Putar kunci kontak engine kembali ke posisi HIDUP.
Tekan sakelar pemutus aliran hidrolik ke posisi TIDAK TERKUNCI.
Gerakkan tuas kontrol hidrolik ke belakang dan ke depan untuk membebaskan tekanan hidrolik.
Gerakkan tuas kontrol hidrolik ke posisi TAHAN.
Putar kunci kontak engine ke posisi MATI dan lepaskan kunci.
Caterpillar Information System:
3176C and 3196 Engines For Caterpillar Built Machines Water Pump - Assemble
3408E and 3412E Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump Drive - Install
420D and 430D Backhoe Loaders Engine Oil and Filter - Change
420D and 430D Backhoe Loaders Engine Oil Level - Check
416D Backhoe Loader Engine Air Filter Service Indicator - Inspect
2006/08/21 Replacement Instructions for the Oil Level Gauge on the Brake, Steering and Hoist Tank {5056, 7450}
988G Wheel Loader Electrohydraulic System Pilot Control Actuator Pressure - Check
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Air Tank (Parking and Secondary Brake)
3408E and 3412E Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump Drive - Remove
IT28G Integrated Toolcarrier and 928G Wheel Loader Brake and Fan Drive System Service Brakes
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader E190 Engine Overspeed Warning
3054B Engine for Caterpillar Built Machines Fuel System - Prime
PF-300B and PS-300B Pneumatic Compactors Propel System General Information
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders Extendable Stick Pads - Inspect/Replace - If Equipped
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Check Valve (Pilot)
2000/08/21 Correction to Disassembly and Assembly , "Differential and Bevel Gear - Assemble" {3256, 3258}
3408E and 3412E Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
2000/08/21 Correction to Testing and Adjusting , "Gear Pump (Hoist) - Test and Adjust and Relief Valve (Hoist Raise) - Test and Adjust" {5073, 5073, 5083, 5083, 5136, 5136}
3054B Engine for Caterpillar Built Machines Fuel System Pressure - Test
2000/06/26 Proper Gear Installation Improves Service Life {5058}
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Quick Coupler - Install
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Propel System Wheel and Tire
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Propel System Pressure Control Valve - Shift Valve
424D, 428D and 438D Backhoe Loaders Final Drive Oil (Front) - Change