Engine Oil Level - Check
Show/hide table
NOTICE |
---|
Do not overfill the crankcase. Engine damage can result. |
Show/hide table
Illustration 1 | g00723507 |
- Pull the hood release lever (1) in order to open the engine access door (2) on the top of the machine. The hood release lever is located under the cab door on the left side of the machine.
Show/hide table
Illustration 2 g00724064 - While the engine is stopped, maintain the oil level between the "ADD" mark and the "FULL" mark on the engine oil dipstick (3).
- If necessary, remove the oil filler cap (4) and add oil.
- Clean the oil filler cap and install the oil filler cap.
- Close the engine access door.
Caterpillar Information System:
416D Backhoe Loader Engine Air Filter Service Indicator - Inspect
2006/08/21 Replacement Instructions for the Oil Level Gauge on the Brake, Steering and Hoist Tank {5056, 7450}
988G Wheel Loader Electrohydraulic System Pilot Control Actuator Pressure - Check
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Air Tank (Parking and Secondary Brake)
3408E and 3412E Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump Drive - Remove
IT28G Integrated Toolcarrier and 928G Wheel Loader Brake and Fan Drive System Service Brakes
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader E190 Engine Overspeed Warning
3054B Engine for Caterpillar Built Machines Fuel System - Prime
2000/07/24 Change to Operation and Maintenance Manuals for Machine Towing {3203, 7000}
3408E and 3412E Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump - Install
988G Wheel Loader Power Train MID 081 - CID 0679 - FMI 13
3408E and 3412E Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump - Remove
420D and 430D Backhoe Loaders Engine Oil and Filter - Change
3408E and 3412E Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump Drive - Install
3176C and 3196 Engines For Caterpillar Built Machines Water Pump - Assemble
416C, 426C, 428C, 436C and 438C Backhoe Loaders Parking
PF-300B and PS-300B Pneumatic Compactors Propel System General Information
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders Extendable Stick Pads - Inspect/Replace - If Equipped
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Check Valve (Pilot)
2000/08/21 Correction to Disassembly and Assembly , "Differential and Bevel Gear - Assemble" {3256, 3258}
3408E and 3412E Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
2000/08/21 Correction to Testing and Adjusting , "Gear Pump (Hoist) - Test and Adjust and Relief Valve (Hoist Raise) - Test and Adjust" {5073, 5073, 5083, 5083, 5136, 5136}
3054B Engine for Caterpillar Built Machines Fuel System Pressure - Test
2000/06/26 Proper Gear Installation Improves Service Life {5058}