Setting the Ramp Time {5645, 7220}
- Asphalt Paver:
- AP-800C (PIN: 1PM1-UP)
- BG-245C (PIN: 4XN1-UP)
- BG-225C (PIN: 5GN1-UP)
- BG-2455C (PIN: 6TN1-UP; ACM1-UP)
- AP-1050B (PIN: 6ZN1-UP)
- AP-1000B (PIN: 7HN1-UP)
- AP-1055B (PIN: 8BM1-UP; ABB1-UP)
- BG-260C (PIN: 8GN1-UP)
- BG-230 (PIN: 9AL1-UP)
- AP-650B (PIN: 9DN1-UP)
The setting for the ramp time is incorrect in this manual. The setting for the Ramp Time "rp" is listed as 4.0. The correct setting should be 2.0. The setting is the amount of elapsed time when the sensor sees the error and the system drives to full gain. The following sentence should replace Step 36 on Page 35.
Turn the grade adjustment knob until 2.0 appears.
Caterpillar Information System:
12H Motor Grader Engine Oil and Filter - Change
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Control Valve (Hoist) - Install
24H Motor Grader Fuses - Replace
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Control Valve (Hoist) - Assemble
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>5N-9081</B> Generator through <B>5N-9432</B> Generator
140H and 160H Motor Graders Engine Oil and Filter - Change
24H Motor Grader Fuel Tank Water and Sediment - Drain
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0498 - FMI 06
525B Wheel Skidder and 535B Wheel Skidder Power Train Differential Pinion Preload - Adjust
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0498 - FMI 05
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0498 - FMI 03
CS-431C, CP-433C and CS-433C Vibratory Compactors Propel System Flushing Valve (Drum Propel Motor) - Test
525B Wheel Skidder and 535B Wheel Skidder Power Train Differential Backlash and Bearings - Adjust
CS-431C, CP-433C and CS-433C Vibratory Compactors Auxiliary Hydraulic System Metering Pump (Steering)
2001/12/10 Correction to Hydraulic Schematic {5050}
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Accelerator Control - Remove and Install
24H Motor Grader Hydraulic System Oil - Change
2000/05/01 New Asphalt Deflector Kit {6630, 6631, 6640}
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Regulator (Power Window) - Remove and Install
CS-431C, CP-433C and CS-433C Vibratory Compactors Auxiliary Hydraulic System Hydraulic Cylinder (Steering)
D400E Series II Articulated Truck Steering, Suspension, and Ejector Body Hydraulic Systems Signal and Pressure Reducing Valve (Steering) - Check
10-20B Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Machine Preparation for Troubleshooting
10-20B Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Visual Inspection
D400E Series II Ejector Truck Steering, Suspension, and Ejector Body Hydraulic Systems Metering Pump (Steering) - Test