CS-431C, CP-433C and CS-433C Vibratory Compactors Auxiliary Hydraulic System Caterpillar


Hydraulic Cylinder (Steering)

Usage:

CP-433C 1ZN



Illustration 1g00377042

(1) Put hydraulic oil on the rod end threads. Torque for piston nut ... 820 ± 28 N·m (605 ± 21 lb ft)

(2) Diameter of a new rod ... 38.090 ± .013 mm (1.5 ± 0.0005 inch)

(3) Bore of a new head ... 38.200 ± .025 mm (1.5 ± 0.0010 inch)

(4) Bore of a new cylinder ... 76.162 ± .038 mm (3.0 ± 0.0015 inch)

Caterpillar Information System:

776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Regulator (Power Window) - Remove and Install
2000/05/01 New Asphalt Deflector Kit {6630, 6631, 6640}
24H Motor Grader Hydraulic System Oil - Change
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Accelerator Control - Remove and Install
2001/12/10 Correction to Hydraulic Schematic {5050}
CS-431C, CP-433C and CS-433C Vibratory Compactors Auxiliary Hydraulic System Metering Pump (Steering)
525B Wheel Skidder and 535B Wheel Skidder Power Train Differential Backlash and Bearings - Adjust
2000/05/01 Setting the Ramp Time {5645, 7220}
12H Motor Grader Engine Oil and Filter - Change
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Control Valve (Hoist) - Install
24H Motor Grader Fuses - Replace
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Control Valve (Hoist) - Assemble
D400E Series II Articulated Truck Steering, Suspension, and Ejector Body Hydraulic Systems Signal and Pressure Reducing Valve (Steering) - Check
10-20B Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Machine Preparation for Troubleshooting
10-20B Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Visual Inspection
D400E Series II Ejector Truck Steering, Suspension, and Ejector Body Hydraulic Systems Metering Pump (Steering) - Test
2000/06/12 A New Nitrogen Charging Valve for Use in Accumulators Provides Improved Service Life {4263, 4331}
D400E Series II Ejector Truck Steering, Suspension, and Ejector Body Hydraulic Systems Steering Cylinder - Test
D400E Series II Ejector Truck Steering, Suspension, and Ejector Body Hydraulic Systems Secondary Steering Pump - Check
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Axle Shaft - Remove - Equipped with TCS
12H Motor Grader Ether Starting Aid Cylinder - Replace
24H Motor Grader Hydraulic System Oil Filter - Replace
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0358 - FMI 03
140H and 160H Motor Graders Ether Starting Aid Cylinder - Replace
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.