CS-431C, CP-433C and CS-433C Vibratory Compactors Auxiliary Hydraulic System Caterpillar


Metering Pump (Steering)

Usage:

CP-433C 1ZN



Illustration 1g00704056

Displacement ... 462 cc/rev (28.2 in3/rev)

Rated flow per minute ... 60 L (16 US gal)

Rated pressure ... 17240 kPa (2500 psi)

Maximum back pressure ... 2068 kPa (300 psi)

Caterpillar Information System:

525B Wheel Skidder and 535B Wheel Skidder Power Train Differential Backlash and Bearings - Adjust
2000/05/01 Setting the Ramp Time {5645, 7220}
12H Motor Grader Engine Oil and Filter - Change
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Control Valve (Hoist) - Install
24H Motor Grader Fuses - Replace
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Control Valve (Hoist) - Assemble
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>5N-9081</B> Generator through <B>5N-9432</B> Generator
140H and 160H Motor Graders Engine Oil and Filter - Change
24H Motor Grader Fuel Tank Water and Sediment - Drain
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0498 - FMI 06
525B Wheel Skidder and 535B Wheel Skidder Power Train Differential Pinion Preload - Adjust
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0498 - FMI 05
2001/12/10 Correction to Hydraulic Schematic {5050}
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Accelerator Control - Remove and Install
24H Motor Grader Hydraulic System Oil - Change
2000/05/01 New Asphalt Deflector Kit {6630, 6631, 6640}
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Regulator (Power Window) - Remove and Install
CS-431C, CP-433C and CS-433C Vibratory Compactors Auxiliary Hydraulic System Hydraulic Cylinder (Steering)
D400E Series II Articulated Truck Steering, Suspension, and Ejector Body Hydraulic Systems Signal and Pressure Reducing Valve (Steering) - Check
10-20B Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Machine Preparation for Troubleshooting
10-20B Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Visual Inspection
D400E Series II Ejector Truck Steering, Suspension, and Ejector Body Hydraulic Systems Metering Pump (Steering) - Test
2000/06/12 A New Nitrogen Charging Valve for Use in Accumulators Provides Improved Service Life {4263, 4331}
D400E Series II Ejector Truck Steering, Suspension, and Ejector Body Hydraulic Systems Steering Cylinder - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.