Special Instruction, REHS0578, "Assembly Procedure for Large Off-Highway Truck Flat Floor Body Assembly" is Available {7258}
- Off-Highway Truck/Tractor:
- 785 (PIN: 8GB1-UP)
- 785B (PIN: 6HK1-UP)
- 785C (PIN: 1HW1-UP; APX1-UP)
- 785C HAA (PIN: 5AZ1-UP)
- 789 (PIN: 9ZC1-UP)
- 789B (PIN: 7EK1-UP)
- 789C (PIN: 2BW1-UP)
- 793 (PIN: 3SJ1-UP)
- 793B (PIN: 1HL1-UP)
- 793C (PIN: 4AR1-UP; 4GZ1-UP; ATY1-UP)
The Special Instruction, REHS0578, "Assembly Procedure for Large Off-Highway Truck Flat Floor Body Assembly" is available.
This special instruction provides the necessary procedures and information for assembling and welding the flat floor body.
This special instruction can be obtained through normal literature ordering channels. The publication also can be found on the Caterpillar Service Information System (SIS).
Caterpillar Information System:
TH62, TH63, TH82, TH83 and TH103 Telehandlers Longitudinal Stability Indicator System Switch (Boom)
988G Wheel Loader Power Train System Schematic
CB-534C and CB-634C Vibratory Compactors Propel System Piston Pump Servo Neutral - Adjust
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Glow Plugs - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Suspension Cylinder Sensor - Troubleshoot
CS-431C, CP-433C and CS-433C Vibratory Compactors Propel System Piston Pump (Axle Propel)
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Air Tank (Service Brake and Retarder) - Remove and Install
2000/04/17 Guideline For Reusable Parts and Salvage Operations, SEBF8419, "Axle Housing and Final Drive Hub Salvage Procedure for 24H Motor Graders" Is Available {3260, 4054}
Installation Instructions for the 145-7099 Wedge Socket {5415, 5418} Installation Instructions for the 145-7099 Wedge Socket {5415, 5418}
CB-535B Vibratory Compactor Propel System Piston Motor (Wheel Propel)
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Tire and Rim (Front) - Remove and Install
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Wheel Chock (Front and Rear) - Remove and Install
525B and 535B Wheel Skidders Power Train Axle Housing - Disassemble
525C, 535C and 545C Wheel Skidders Power Train Axle Housing - Assemble
525B and 535B Wheel Skidders Power Train Service Brake - Remove and Install
3114, 3116, and 3126 Engines Air Inlet and Exhaust System
525B and 535B Wheel Skidders Power Train Differential and Bevel Gear - Remove
525B and 535B Wheel Skidders Power Train Differential and Bevel Gear - Disassemble
525B and 535B Wheel Skidders Power Train Differential Pinion - Disassemble
525B and 535B Wheel Skidders Power Train Differential Pinion - Assemble
525B and 535B Wheel Skidders Power Train Differential and Bevel Gear - Install
AP-1000B and BG-260C Asphalt Pavers Propel System Wheel Alignment - Check and Adjust
3046 Engine for Caterpillar Built Machines Engine Oil Pressure Switch - Test
776D, 777D and 777D HAA Off-Highway Truck/Tractor Power Train Bypass Switch (Transmission Charging Oil Filter)