Propel Speed Range Control
Show/hide table
| NOTICE |
|---|
Stop the machine before changing the speed range. Do not change the speed range while the machine is moving. |
Show/hide table
 | |
| Illustration 1 | g00568017 |
Show/hide table
| Propel Speed Range Control (1) - The propel speed range control is located on the control console to the right of the seat. The control allows the machine operation in the "HIGH" range or the "LOW" range. |
Show/hide table
| LOW - In order to place the machine in "LOW" range, push the propel speed range control (1) forward. "LOW" range reduces the overall speed of the machine. |
Show/hide table
| HIGH - In order to place the machine in "HIGH" range, push the propel speed range control (1) rearward. "HIGH" range increases the speed of the machine. |
Variable Speed Control (If Equipped)
Variable Speed Control Knob (2) - The variable speed control knob sets the maximum propel speed within the propel speed range (1).
The variable speed control knob (2) allows the operator to set the maximum propel speed in order to repeat specific propel speed settings.
Before you adjust the variable speed control knob, be sure that the propel control lever is all the way forward.
In order to increase the maximum propel speed setting, turn the variable speed control knob (2) clockwise.
In order to decrease the maximum propel speed setting, turn the variable speed control knob (2) counterclockwise.
Caterpillar Information System:
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Compensator Valve - Remove
Challenger 65C, Challenger 65D, Challenger 65E, Challenger 70C, Challenger 75C, Challenger 75D, Challenger 75E, Challenger 85C, Challenger 85D, Challenger 85E and Challenger 95E Agricultural Tractors Machine Monitor System Machine Monitor Faults
24H Motor Grader Hydraulic and Steering System Steering Hydraulic System Oil Flow
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Window Wiper - Inspect/Replace - If Equipped
CB-634C Vibratory Compactor Propel Control
24H Motor Grader Hydraulic and Steering System Unloading Valve (Secondary Steering)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Load Control Valve (Lift)
CB-634C Vibratory Compactor Parking Brake Control
D350E Series II Articulated Truck Hoist Cylinder - Install
784C and 785C Off-Highway Truck Power Train Transmission Planetary and Transfer Gears - Install
3054 Engine for Caterpillar Built Machines Fuel Injection Pump - Install - Type 2 Engines and 7BJ Engines
554 Forwarder and 574 Forwarder Secondary Disconnect Switch
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Compensator Valve - Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Compensator Valve - Disassemble
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Electronic Systems Wire Description
3116 Engine for Challenger 35, and Challenger 45 Agricultural Tractors and 3126 Engine for Challenger 55 Agricultural Tractor Engine Supplement Fuel Filter and Fuel Filter Base - Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Compensator Valve - Assemble
D400E Series II Articulated Truck Truck Body - Remove
D400E Series II Articulated Truck Truck Body - Install
CB-634C Vibratory Compactor Throttle Control
554 and 574 Forwarders Power Train Differential Lock - Check
988G Wheel Loader Power Train Transmission Oil Pump
24H Motor Grader Hydraulic and Steering System Secondary Steering System
CB-634C Vibratory Compactor Vibratory Mode Control