Compensator Valve - Assemble
Assembly Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
- This is a exploded view of the compensator.
Show/hide table
Illustration 1 | g00568290 |
- Install seal (14) on orifice valve (13) .
Show/hide table
Illustration 2 | g00568286 |
- Install orifice valve (13) .
Show/hide table
Illustration 3 | g00568285 |
- Install spools (12) .
Show/hide table
Illustration 4 | g00568283 |
- Install seals (11) .
Show/hide table
Illustration 5 | g00568282 |
- Install plugs (10) .
Show/hide table
Illustration 6 | g00568281 |
- Install spring retainers (9) .
Show/hide table
Illustration 7 | g00568279 |
- Install the inner springs (8) .
Show/hide table
Illustration 8 | g00568278 |
- Install the outer springs (7) .
Show/hide table
Illustration 9 | g00568254 |
- Install seat (6) .
Show/hide table
Illustration 10 | g00568251 |
- Install the seal and plug (5) .
Show/hide table
Illustration 11 | g00568250 |
- Install the washers and adjustment screw (4) .
Show/hide table
Illustration 12 | g00568248 |
- Install nuts (3) .
Show/hide table
Illustration 13 | g00568246 |
- Install cap nuts (2) .
Show/hide table
Illustration 14 | g00568245 |
- Install O-ring (1) and the plug.
Show/hide table
Illustration 15 | g00568243 |
End By: Install the compensator valve. Refer to Disassembly and Assembly, "Compensator Valve - Install" for the machine that is being serviced.
Caterpillar Information System:
3116 Engine for Challenger 35, and Challenger 45 Agricultural Tractors and 3126 Engine for Challenger 55 Agricultural Tractor Engine Supplement Fuel Filter and Fuel Filter Base - Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Electronic Systems Wire Description
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Compensator Valve - Disassemble
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Compensator Valve - Install
CB-634C Vibratory Compactor Propel Speed Range Control
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Compensator Valve - Remove
Challenger 65C, Challenger 65D, Challenger 65E, Challenger 70C, Challenger 75C, Challenger 75D, Challenger 75E, Challenger 85C, Challenger 85D, Challenger 85E and Challenger 95E Agricultural Tractors Machine Monitor System Machine Monitor Faults
24H Motor Grader Hydraulic and Steering System Steering Hydraulic System Oil Flow
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Window Wiper - Inspect/Replace - If Equipped
CB-634C Vibratory Compactor Propel Control
24H Motor Grader Hydraulic and Steering System Unloading Valve (Secondary Steering)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Load Control Valve (Lift)
D400E Series II Articulated Truck Truck Body - Remove
D400E Series II Articulated Truck Truck Body - Install
CB-634C Vibratory Compactor Throttle Control
554 and 574 Forwarders Power Train Differential Lock - Check
988G Wheel Loader Power Train Transmission Oil Pump
24H Motor Grader Hydraulic and Steering System Secondary Steering System
CB-634C Vibratory Compactor Vibratory Mode Control
CB-634C Vibratory Compactor Vibratory On/Off Control
3512B and 3516B Engine Supplement for and 784C,, 785C and and 785C HAA Off-Highway Truck/Tractors Fuel Filter (Primary) and Fuel Filter Base - Remove and Install
CB-634C Vibratory Compactor Vibratory Control
AP-1055B and BG-2455C Asphalt Pavers Engine Hour Meter
216, 226 and 228 Skid Steer Loaders Powertrain Tire and Rim - Remove and Install