Drive Shaft - Remove and Install
Removal Procedure
Show/hide table
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool. |
Show/hide table
Accidental machine starting can cause injury or death to personnel working on the machine. To avoid accidental machine starting, turn the battery disconnect switch to the OFF position and remove the key. Place a do not operate tag at the battery disconnect switch location to inform personnel that the machine is being worked on. |
Note: The fuel tank assembly was removed for photographic purposes.
- Remove four bolts (2) that hold drive shaft (3) to yoke (1) .
Show/hide table
Illustration 1 | g00567294 |
- Push yoke (1) toward the transmission.
- Remove bolts (4) and the washers from drive shaft (3) that connects the drive shaft to the engine.
Show/hide table
Illustration 2 | g00567331 |
Installation Procedure
- Install drive shaft (3) to the engine with bolts (4) and the washers.
Show/hide table
Illustration 3 | g00567331 |
- Position drive shaft (3) to yoke (1) at the transmission.
Show/hide table
Illustration 4 | g00567444 |
- Install bolts (2) .
Caterpillar Information System:
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Electronic Systems Unswitched Power - Troubleshoot
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Electronic Systems Fuel Solenoid - Troubleshoot
3054 Engine for Caterpillar Built Machines Fuel Injection Pump - Remove - Type 1 Engines and 9RM Engines
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Electronic Systems Gear Shift Switch - Troubleshoot
24H Motor Grader Hydraulic and Steering System Metering Pump (Steering)
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Electronic Systems Accessory Relay - Troubleshoot
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Steering Control - Disassemble
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Electronic Systems Transmission Direction Interrupt Relay - Troubleshoot
797 Off-Highway Truck Power Train Torque Converter - Remove
784C and 785C Off-Highway Truck Power Train Gear Pump (Rear Axle Oil) - Disassemble
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Electronic Systems Transmission Power Relay - Troubleshoot
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Electronic Systems No. 2 Auxiliary Relay - Troubleshoot
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Auxiliary Hydraulic System Gear Pump Flow - Test
988G Wheel Loader Power Train Transmission Hydraulic System
784C and 785C Off-Highway Truck Power Train Gear Pump (Rear Axle Oil) - Assemble
D350E Series II Articulated Truck Center Suspension Frame - Remove
797 Off-Highway Truck Steering System Front Wheel
3054 Engine for Caterpillar Built Machines Fuel Injection Pump - Install - Type 1 Engines and 9RM Engines
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Electronic Systems Wiring Harness
3054 Engine for Caterpillar Built Machines Fuel Injection Pump - Remove - Type 2 Engines and 7BJ Engines
784C and 785C Off-Highway Truck Power Train Transmission Planetary and Transfer Gears - Remove
Retrofitting the 136-7822 Transmission Control for the 109-3664 Transmission Control {3065} Retrofitting the 136-7822 Transmission Control for the 109-3664 Transmission Control {3065}
3512B and 3516B Engine Supplement for and 784C,, 785C and and 785C HAA Off-Highway Truck/Tractors Battery - Remove and Install
24H Motor Grader Hydraulic and Steering System Relief Valve (Steering Cylinder Crossover)