Hydraulic System Oil Level - Check
Show/hide table
 | |
| Illustration 1 | g00513582 |
The hydraulic oil tank is located on the right rear of the machine.
- Maintain the oil level to the "FULL" mark in the sight gauge.
- Remove the oil filler cap and add oil, if necessary.
Show/hide table
 | |
| Illustration 2 | g00513567 |
- Clean the oil filler cap. Install the oil filler cap.
Caterpillar Information System:
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations Accessing Diagnostic Information
527 Track-Type Skidder Hydraulic System Oil Filter - Replace
D250E Series II and D300E Series II Articulated Trucks Machine Systems Truck Body - Remove
554 Forwarder and 574 Forwarder Heating and Air Conditioning Control
527 Track-Type Skidder Hydraulic System Oil - Change
3176C and 3196 Engines For Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
527 Track-Type Skidder Fuel Tank Cap and Strainer - Clean
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Steering Control
D250E Series II and D300E Series II Articulated Trucks Power Train Solenoid Valve (Differential Lock) - Remove and Install
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations CID 0468 FMI 03 Position Sensor (Brake Pedal) Voltage Above Normal - Test
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Center Arm (Steering) - Remove and Install
784C and 785C Off-Highway Trucks Machine Systems Check Valve (Double) - Disassemble
3412E Engine Supplement for 773D Off-Highway Trucks and 775D Off-Highway Quarry Trucks Radiator - Remove
554 Forwarder and 574 Forwarder Seat
69D and 769D Off-Highway Truck/Tractors and 771D Quarry Truck Hydraulic System Gear Pump (Hoist and Brake)
D250E Series II and D300E Series II Articulated Trucks Machine Systems Equalizer Arm - Remove
824G , 825G and 826G Landfill Compactor Caterpillar Monitoring System
3176C and 3196 Engines For Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
3524B Engines for Off-Highway Trucks Engine Cranks but Will Not Start
773D Off-Highway Truck and 775D Quarry Truck Hydraulic System Gear Pump (Hoist and Brake)
527 Track-Type Skidder Recoil Spring Compartment Oil Level - Check
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Steering Cylinder
527 Track-Type Skidder Rollover Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) - Inspect
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations CID 0468 FMI 04 Position Sensor (Brake Pedal) Voltage Below Normal - Test