Model View Illustrations
Show/hide table
 | |
| Illustration 1 | g00511140 |
(1) Operator compartment. (2) Blade. (3) Hydraulic tank. (4) Cutting edge and end bits. | |
Show/hide table
 | |
| Illustration 2 | g00511153 |
(5) Engine compartment. (6) Battery compartment. (7) Transmission. | |
Show/hide table
 | |
| Illustration 3 | g00511158 |
(8) Fuel tank. (9) Engine air precleaner. (10) Radiator. | |
Basic shipping specifications for each machine are listed below.
Show/hide table
| 824G Wheel Tractor | |
| Approximate Weight | 26620 kg (58600 lb) |
| Length With Blade | 8.02 m (26.31 ft) |
| Width Over Tires | 3.28 m (10.75 ft) |
| Width With Blade | 4.51 m (14.79 ft) |
| Height | 3.76 m (12.35 ft) |
Show/hide table
| 825G Soil Compactor | |
| Approximate Weight | 31740 kg (69900 lb) |
| Length With Blade | 8.25 m (27.05 ft) |
| Width Over Wheel Drums | 3.65 m (11.97 ft) |
| Width With Blade | 4.61 m (15.14 ft) |
| Height | 3.74 m (12.26 ft) |
Show/hide table
| 826G Landfill Compactor | |
| Approximate Weight | 33350 kg (73500 lb) |
| Length With Blade | 8.42 m (27.62 ft) |
| Width Over Wheel Drums | 3.80 m (12.47 ft) |
| Width With Blade | 4.50 m (14.77 ft) |
| Height | 3.82 m (12.54 ft) |
Caterpillar Information System:
527 Track-Type Skidder Tracks
3306B Industrial Engine Cold Weather Starting
3406C Engines for Caterpillar Built Machines Water Pump
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Ride Control System
773D Off-Highway Truck and 775D Quarry Truck Differential and Bevel Gear
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Chip Detector - Test
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train General Information
D250E Series II and D300E Series II Articulated Trucks Power Train Wheel Bearings and Duo-Cone Seals - Remove
D250E Series II and D300E Series II Articulated Trucks Power Train Wheel Bearings and Duo-Cone Seals - Install
D250E Series II and D300E Series II Articulated Trucks Power Train Transmission and Transfer Gears - Connect
D250E Series II and D300E Series II Articulated Trucks Power Train Transmission and Transfer Gears - Separate
D250E Series II and D300E Series II Articulated Trucks Power Train Spindle - Remove
793C Off-Highway Truck/Tractor Power Train Transmission Hydraulic Control - Remove
793C Off-Highway Truck/Tractor Power Train Transmission Hydraulic Control - Disassemble
784C and 785C Off-Highway Trucks Machine Systems Hoist Cylinder - Remove
793C Off-Highway Truck/Tractor Power Train Transmission Hydraulic Control - Assemble
793C Off-Highway Truck/Tractor Power Train Screen (Torque Converter) - Disassemble
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Drive Shaft
527 Track-Type Skidder Leaving the Machine
3408B and 3408C Industrial and Marine Engines Gear Group (Rear)
527 Track-Type Skidder Lifting and Tying Down the Machine
AP-1000B and BG-260C Asphalt Pavers Front Wheel Assist Control (FWA) - If Equipped
793C Off-Highway Truck/Tractor Power Train Screen (Torque Converter) - Assemble
CB-434C, CB-534C and CB-634C Vibratory Compactors Water Spray System Water Spray Pump Flow - Test