Screen (Torque Converter) - Disassemble
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1P-1855 | Retaining Ring Pliers | 1 |
Start By:
- Remove the torque converter outlet screen. Refer to Disassembly and Assembly, "Torque Converter Outlet Screen - Remove and Install".
- Place the torque converter outlet screen on a suitable base.
- Remove housing (2) of the torque converter outlet screen from base (3).
- Remove screen assembly (5) (not shown).
- Use Tool (A) to remove retaining ring (8).
- Remove plug (1) and O-ring seal (4).
- Remove retainer (6).
- Remove spring (7).
Show/hide table
Illustration 3 g00511122 - Remove O-ring seal (9).
Show/hide table
Illustration 4 g00511129 Show/hide tableIllustration 5 g00511134 - Remove bypass switch (10) of the torque converter outlet screen.
- Remove O-ring seal (15).
- Remove valve (14).
- Remove spring (13).
Show/hide table
Illustration 1 | g00511099 |
Show/hide table
Illustration 2 | g00511115 |
Caterpillar Information System:
793C Off-Highway Truck/Tractor Power Train Transmission Hydraulic Control - Assemble
784C and 785C Off-Highway Trucks Machine Systems Hoist Cylinder - Remove
793C Off-Highway Truck/Tractor Power Train Transmission Hydraulic Control - Disassemble
793C Off-Highway Truck/Tractor Power Train Transmission Hydraulic Control - Remove
824G , 825G and 826G Landfill Compactor Model View Illustrations
527 Track-Type Skidder Tracks
3306B Industrial Engine Cold Weather Starting
3406C Engines for Caterpillar Built Machines Water Pump
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Ride Control System
773D Off-Highway Truck and 775D Quarry Truck Differential and Bevel Gear
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Chip Detector - Test
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train General Information
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Drive Shaft
527 Track-Type Skidder Leaving the Machine
3408B and 3408C Industrial and Marine Engines Gear Group (Rear)
527 Track-Type Skidder Lifting and Tying Down the Machine
AP-1000B and BG-260C Asphalt Pavers Front Wheel Assist Control (FWA) - If Equipped
793C Off-Highway Truck/Tractor Power Train Screen (Torque Converter) - Assemble
CB-434C, CB-534C and CB-634C Vibratory Compactors Water Spray System Water Spray Pump Flow - Test
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Steering and Brake Manifold Valve - Assemble
3406C Engines for Caterpillar Built Machines Fan Drive
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Fixed Axle
793C Off-Highway Truck/Tractor Power Train Transfer Gears - Disassemble
793C Off-Highway Truck/Tractor Power Train Transfer Gears - Assemble