Hydraulic Tank (Steering) - Disassemble
Disassembly Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7575     | Link Bracket     | 2     |
Start By:
- Remove the hydraulic tank (steering). Refer to Disassembly and Assembly, "Hydraulic Tank (Steering) - Remove".
- Install Tooling (A) to steering hydraulic tank (1). Attach a suitable lifting device to Tooling (A). Attach the lifting device to a hoist. Position steering hydraulic tank (1) on a suitable work bench. The weight of steering hydraulic tank (1) is approximately 49 kg (108 lb).
Show/hide table
Illustration 1 | g00929002 |
- Remove locknuts (2), the oil filter (3) and the base from steering hydraulic tank (1) .
Show/hide table
Illustration 2 | g00504588 |
- Remove screen assembly (4) and the O-ring seal from steering hydraulic tank (1).
Show/hide table
Illustration 3 | g00504589 |
- Remove bolts (5), the plug adapter, and the gasket from steering hydraulic tank (1).
- Remove elbow (6) and the O-ring seal from steering hydraulic tank (1) .
- Remove breaker relief valve (7) and the O-ring seal. Remove bolts, the sight gauge (8) and the O-ring seals.
Show/hide table
Illustration 4 | g00504590 |
- Remove bolts (9), the locknuts, and the cover assembly (10) from steering hydraulic tank (1) .
Show/hide table
Illustration 5 | g00504605 |
Caterpillar Information System:
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Fuel Tank - Install
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Fuel Tank - Remove
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Fuel Level Sensor - Remove and Install
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Control Valve (Hoist) - Remove
3304B and 3306B Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove
3304B and 3306B Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Gear Pump (Hoist and Brake) - Install
784C, 785C and 785C HAA Off-Highway Truck Air System and Brakes Relief Valve (Rear Brake Oil Cooler) - Test and Adjust
836G Landfill Compactor and 834G Wheel Dozer Safety Messages
572R Pipelayer Power Train Final Drive - Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Detent Kickout Pressure Test
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System System Schematic
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Hydraulic Tank (Steering) - Assemble
3408E and 3412E Engines for Caterpillar Built Machines Cylinder Liner - Remove
583R Pipelayer Power Train Final Drive - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines Crankshaft Main Bearings - Install
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Hoist Cylinder
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Inverter Valve (Secondary Brake) - Remove
773D Off-Highway Truck and 775D Quarry Truck Engine Starting with Ether Starting Aid - If Equipped
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0041 FMI 03 Sensor Power Supply (8 DCV) Voltage Above Normal - Test
572R Pipelayer Power Train Bevel and Transfer Gears - Assemble
824G , 825G and 826G Landfill Compactor Reversing Fan Control
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Position Sensor (Dump Body) - Adjust
824G , 825G and 826G Landfill Compactor Power Guard Control