Fuel Tank - Install
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件说明 | 数量 |
A | 5P-3413 | 管密封胶 | 1 |
- 检查所有 O 形密封圈和部件有无磨损或损坏。 如有必要,请更换部件。
- 利用所密封的润滑剂轻轻润滑所有 O 形密封圈。
Show/hide table
图 1 g00504565 - 将两根吊索连接至燃油箱 (1),如图所示。 将吊索固定到适当的举倾机构上。
- 将燃油箱 (1) 置于机架组件上。 燃油箱 (1) 的重量约为
297 kg (655 lb) 。Show/hide table图 2 g00504574 - 将 U 形螺栓 (12) 和螺栓 (11) 安装在燃油箱 (1) 右侧。 此时不要拧紧螺母 (11)。
Show/hide table
图 3 g00504570 - 将 U 形螺栓 (10) 和螺栓 (9) 安装在燃油箱 (1) 左侧。 此时不要拧紧螺母 (9)。
Show/hide table
图 4 g00504564 - 将支架 (8)、垫圈、螺栓 (7)、硬垫圈和锁紧螺母安装至燃油箱 (1) 的底部。 此时拧紧所有安装螺栓和螺母。
Show/hide table
图 5 g00504563 - 安装夹子 (6) 和螺栓 (5)。
Show/hide table
图 6 g00504562 - 连接线束组件 (4)。
Show/hide table
图 7 g00504560 - 将软管组件 (3) 连接到燃油箱 (1) 上。
Show/hide table
图 8 g00504555 - 将工具 (A) 应用于管塞 (2) 上。 在燃油箱 (1) 底部安装管塞 (2)。
- 加注燃油箱。 向燃油系统充油。 关于充注燃油系统的正确程序,请参阅操作和保养手册, "燃油系统 - 充注"。
结束:
- 拆卸挡圈和销(车斗)。 请参阅拆解和组装, "挡圈和销钉(车斗)- 拆卸和安装"。
Caterpillar Information System:
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Fuel Tank - Remove
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Fuel Level Sensor - Remove and Install
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Control Valve (Hoist) - Remove
3304B and 3306B Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove
3304B and 3306B Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Gear Pump (Hoist and Brake) - Install
784C, 785C and 785C HAA Off-Highway Truck Air System and Brakes Relief Valve (Rear Brake Oil Cooler) - Test and Adjust
836G Landfill Compactor and 834G Wheel Dozer Safety Messages
572R Pipelayer Power Train Final Drive - Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Detent Kickout Pressure Test
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System System Schematic
793B Off-Highway Truck Air System and Brakes Towing the Machine - Preparation
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Hydraulic Tank (Steering) - Disassemble
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Hydraulic Tank (Steering) - Assemble
3408E and 3412E Engines for Caterpillar Built Machines Cylinder Liner - Remove
583R Pipelayer Power Train Final Drive - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines Crankshaft Main Bearings - Install
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Hoist Cylinder
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Inverter Valve (Secondary Brake) - Remove
773D Off-Highway Truck and 775D Quarry Truck Engine Starting with Ether Starting Aid - If Equipped
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0041 FMI 03 Sensor Power Supply (8 DCV) Voltage Above Normal - Test
572R Pipelayer Power Train Bevel and Transfer Gears - Assemble
824G , 825G and 826G Landfill Compactor Reversing Fan Control
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Position Sensor (Dump Body) - Adjust