773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Caterpillar


Brake Valve (Parking and Secondary) - Remove

Usage:

773D 7CS

拆卸步骤

开始:

  1. 释放气罐中的空气压力。 请参阅拆解和组装, "气罐(制动器)- 排气"。


注意

在检查、保养、测试、调整及维修产品时,请小心确保盛接油液。 在打开任何舱室或拆卸任何含有油液的部件前,请准备好盛接液体用的适当容器。


------ WARNING! ------

拆下压力系统上的软管或接头会造成人身伤害。

如果不释放压力,也会造成人身伤害。

切勿在空气系统中的压力尚未释放完之前拆下或断开软管或接头。




    图 1g00503346

  1. 为便于安装,在四个软管组件 (2) 上作识别标记。 将四个软管组件 (2) 从停车和辅助制动阀 (1) 上断开。

    注: 将盖和塞安装在全部孔口上,以免污垢或碎屑进入系统。 清洁度是一项重要的因素。 拆卸步骤开始之前,应彻底清洁部件外部。 这将防止脏污进入内部部件。



    图 2g00503355

  2. 将两个软管组件 (3) 和三通 (4) 从停车和辅助制动阀 (1) 上断开。


    图 3g00503383

  3. 将软管组件 (5) 和弯头 (6) 从停车和辅助制动阀 (1) 上断开。


    图 4g00503386

  4. 拆下四个螺栓 (7) 和硬垫圈。 将停车和辅助制动阀 (1) 从机架组件上拆下。

Caterpillar Information System:

IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Loader Frame and Rear Frame - Connect
789C Off-Highway Truck/Tractor Air System and Brakes Hydraulic Tank (Torque Converter, Hoist, Brake, and Transmission)
3408E and 3412E Engines for Caterpillar Built Machines Fuel Filter Base
583R Pipelayer Power Train Steering Clutch and Brake Control Valve - Assemble
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Power Train Torque Converter - Disassemble
784C and 785C Off-Highway Trucks Machine Systems Wheel, Brake and Suspension (Front) - Install
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Relief Valve (Pulled Unit Dual Stage) - Test and Adjust
583R Pipelayer Power Train Steering Clutch and Brake Control Valve - Disassemble
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Brake Tank (Makeup) - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines Connecting Rod Bearings - Install
583R Pipelayer Power Train Steering Clutch and Brake Control Valve - Install
583R Pipelayer Power Train Steering Clutch and Brake - Disassemble
789C Off-Highway Truck/Tractor Air System and Brakes Gear Pump (Torque Converter, Parking Brake Release, and Brake Cooling)
143H and 163H Motor Graders All Wheel Drive Solenoid Valve (Charge) - Test
554 Forwarder and 574 Forwarder Hydraulic System Diverter Valve (Boom Tilt Cylinder and Gate Cylinder)
784C, 785C and 785C HAA Off-Highway Truck Air System and Brakes Gear Pump (Hoist and Rear Brake Cooling)
IT14G Integrated Toolcarrier and 914G Wheel Loader Standard Power Train Creeper Control - If Equipped
554 Forwarder and 574 Forwarder Hydraulic System Pressure Reducing Valve (Maximum Signal)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Tilt Cylinder - Isolation and Drift Check
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Brake Valve (Parking and Secondary) - Install
3114, 3116 and 3126 MUI Engine Governors Governor Identification - Introduction
784C and 785C Off-Highway Trucks Machine Systems Steering Cylinder - Remove
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Check Valve (Air/Hydraulic Cylinder) - Remove and Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Check Valve (Primary Air Tank) - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.