Creeper Control - If Equipped
Show/hide table
 | |
| Illustration 1 | g00449481 |
The creeper speed control allows the operator to infinitely vary the ground speed of the machine. The ground speed can be varied between 0 to 9 km/h (0 to 5.6 mph).
Move the lever forward into the detent position. This provides the maximum speed setting. Move the lever backward to the point that is just out of the detent. This will put the machine in the maximum slow speed.
When the creeper speed control is moved into the slow speed mode, some of the hystat pump signal is drained to the hydraulic tank. This destrokes the pump and this upstrokes the variable displacement motor, while machine speed is decreased and full engine rpm is maintained.
Caterpillar Information System:
784C, 785C and 785C HAA Off-Highway Truck Air System and Brakes Gear Pump (Hoist and Rear Brake Cooling)
554 Forwarder and 574 Forwarder Hydraulic System Diverter Valve (Boom Tilt Cylinder and Gate Cylinder)
143H and 163H Motor Graders All Wheel Drive Solenoid Valve (Charge) - Test
789C Off-Highway Truck/Tractor Air System and Brakes Gear Pump (Torque Converter, Parking Brake Release, and Brake Cooling)
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Brake Valve (Parking and Secondary) - Remove
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Loader Frame and Rear Frame - Connect
789C Off-Highway Truck/Tractor Air System and Brakes Hydraulic Tank (Torque Converter, Hoist, Brake, and Transmission)
3408E and 3412E Engines for Caterpillar Built Machines Fuel Filter Base
583R Pipelayer Power Train Steering Clutch and Brake Control Valve - Assemble
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Power Train Torque Converter - Disassemble
784C and 785C Off-Highway Trucks Machine Systems Wheel, Brake and Suspension (Front) - Install
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Relief Valve (Pulled Unit Dual Stage) - Test and Adjust
554 Forwarder and 574 Forwarder Hydraulic System Pressure Reducing Valve (Maximum Signal)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Tilt Cylinder - Isolation and Drift Check
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Brake Valve (Parking and Secondary) - Install
3114, 3116 and 3126 MUI Engine Governors Governor Identification - Introduction
784C and 785C Off-Highway Trucks Machine Systems Steering Cylinder - Remove
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Check Valve (Air/Hydraulic Cylinder) - Remove and Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Check Valve (Primary Air Tank) - Remove and Install
784C and 785C Off-Highway Trucks Machine Systems Steering Cylinder - Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Standard Power Train Hydrostatic System
G3B, K3A and L3A Denso Alternators T3 Charging System - Test
3304B and 3306B Engines for Caterpillar Built Machines Crankshaft - Install
143H and 163H Motor Graders All Wheel Drive Solenoid Valve (All Wheel Drive) - Test