Winch Control Valve - Install
Installation Procedure
- Put 1U-6396 O-ring Assembly Compound on the O-ring seals that are between the winch and winch control valve (3) in order to hold O-rings in place. Place the winch control valve in position and install bolts (2) .
Show/hide table
Illustration 1 | g00546036 |
- Connect winch linkages (4) and (5) to the winch control valve.
- Connect tube assembly (7) and the O-ring to the winch control valve.
- Install bolts (6) and the washers.
- Connect tube assembly (1) and the O-ring to the winch control valve.
- Refer to Hydraulic System Testing and Adjusting, SENR4718 for the proper linkage adjustment procedure.
Caterpillar Information System:
583R Pipelayer Machine Systems Winch Control Valve - Disassemble
583R Pipelayer Machine Systems Counterweight Control Valve - Remove
583R Pipelayer Machine Systems Counterweight Control Valve - Disassemble
583R Pipelayer Machine Systems Counterweight Control Valve - Assemble
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Turbocharger - Remove and Install
769D Off-Highway Truck and 771D Quarry Truck Circuit Breakers - Reset
CB-534C Vibratory Compactor Lubricant Viscosities
966F Series II Wheel Loader Power Train Differential and Bevel Gear - Remove
Caterpillar Monitoring System Digital Tattletale Mode
797B Off-Highway Truck Power Train Torque Converter Housing - Disassemble
3306C Engines for Caterpillar Built Machines Flywheel Housing
789C Off-Highway Truck Hydraulic System Hydraulic System
583R Pipelayer Machine Systems Winch Control Valve - Remove
966F Series II Wheel Loader Power Train Differential and Bevel Gear - Install
769D Off-Highway Truck and 771D Quarry Truck Cooling System Coolant (ELC) - Change
143H and 163H Motor Graders All Wheel Drive General Troubleshooting Information
769D Off-Highway Truck and 771D Quarry Truck Cooling System Coolant Extender (ELC) - Add
769D Off-Highway Truck and 771D Quarry Truck Cooling System Coolant Level - Check
836G Landfill Compactor and 834G Wheel Dozer Steering Frame Lock
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0110 FMI 03 Temperature Sensor (Engine Coolant) Voltage Above Normal - Test
769D Off-Highway Truck and 771D Quarry Truck Cooling System Pressure Cap - Clean/Replace
769D Off-Highway Truck and 771D Quarry Truck Cooling System Relief Valve - Clean
980G Wheel Loader Power Train Transmission Hydraulic Control Valve - Disassemble
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0110 FMI 04 Temperature Sensor (Engine Coolant) Voltage Below Normal - Test