Steering Frame Lock
Show/hide table
No clearance for person in this area when machine turns. Severe injury or death from crushing could occur. |
Note: To connect the steering frame lock, the machine must be in the straight ahead position.
- Remove locking pin (1). Remove pin (2) which holds steering frame lock (3) in the STORED position.
Show/hide table
Illustration 3 g00841437 - Connect steering frame lock (3) to the front frame.
- With steering frame lock (3) in the LOCKED position, install pin (2) and locking pin (1).
Show/hide table
Illustration 1 | g00841446 |
834G Storage Location |
Show/hide table
Illustration 2 | g00841439 |
836G Storage Location |
Note: Connect the steering frame lock when the machine is being lifted and when the machine is being transported. Also connect the steering frame lock if you are performing service work near the articulation joint.
Caterpillar Information System:
769D Off-Highway Truck and 771D Quarry Truck Cooling System Coolant Level - Check
769D Off-Highway Truck and 771D Quarry Truck Cooling System Coolant Extender (ELC) - Add
143H and 163H Motor Graders All Wheel Drive General Troubleshooting Information
769D Off-Highway Truck and 771D Quarry Truck Cooling System Coolant (ELC) - Change
966F Series II Wheel Loader Power Train Differential and Bevel Gear - Install
583R Pipelayer Machine Systems Winch Control Valve - Remove
583R Pipelayer Machine Systems Winch Control Valve - Install
583R Pipelayer Machine Systems Winch Control Valve - Disassemble
583R Pipelayer Machine Systems Counterweight Control Valve - Remove
583R Pipelayer Machine Systems Counterweight Control Valve - Disassemble
583R Pipelayer Machine Systems Counterweight Control Valve - Assemble
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Turbocharger - Remove and Install
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0110 FMI 03 Temperature Sensor (Engine Coolant) Voltage Above Normal - Test
769D Off-Highway Truck and 771D Quarry Truck Cooling System Pressure Cap - Clean/Replace
769D Off-Highway Truck and 771D Quarry Truck Cooling System Relief Valve - Clean
980G Wheel Loader Power Train Transmission Hydraulic Control Valve - Disassemble
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0110 FMI 04 Temperature Sensor (Engine Coolant) Voltage Below Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0110 FMI 06 Temperature Sensor (Engine Coolant) Current Above Normal - Test
143H and 163H Motor Graders All Wheel Drive Visual Inspection
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0171 FMI 03 Temperature Sensor (Ambient Air) Voltage Above Normal - Test
769D Off-Highway Truck and 771D Quarry Truck Differential Thrust Pin Clearance - Check
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Hydraulic System Oil Filter (Implement Case Drain)
769D Off-Highway Truck and 771D Quarry Truck Breather (Differential and Final Drive) - Replace
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Hydraulic System Schematic