Leaving the Machine
Show/hide table
| |
| Illustration 1 | g00628779 |
- Use steps (1) and ladders (2) when you get off the machine. Face the machine and use both hands. Make sure that the steps are clear of debris before you dismount.
Show/hide table
Illustration 2 g00037860 - Face the machine and maintain a three-point contact with the steps and with the handholds.
Note: Three-point contact can be made with two feet and one hand. Three-point contact can also be one foot and two hands.
- Inspect the engine compartment for debris. Clean out any debris and paper in order to avoid a fire.
- Remove all flammable debris from the front bottom guard in order to reduce the fire hazard. Dispose of the debris properly.
- Turn the battery disconnect switch to the OFF position. Remove the disconnect key, and secure the lock on the cover plate. This will help to prevent a battery short circuit. Removing the key will also help to protect the battery from vandalism and from any possible current draw by components over extended time periods.
- Install all the covers and install all the vandalism protection locks.
Caterpillar Information System:
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Air Cleaner - Remove and Install
583R Pipelayer Machine Systems Winch Drive Motor - Remove
769D Off-Highway Truck and 771D Quarry Truck Stopping the Engine
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Steering Frame Lock - Separate and Connect
583R Pipelayer Machine Systems Cable - Remove and Install
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0096 FMI 04 Level Sensor (Fuel) Voltage Below Normal - Test
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Position Sensor (Hoist Control)
966G Wheel Loader and 972G Wheel Loader Engine Supplement Piston Motor (Hydraulic Fan) - Disassemble
784C and 785C Off-Highway Trucks Machine Systems Air Dryer - Remove and Install
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0096 FMI 03 Level Sensor (Fuel) Voltage Above Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0075 FMI 06 Temperature Sensor (Steering Oil) Current Above Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0075 FMI 04 Temperature Sensor (Steering Oil) Voltage Below Normal - Test
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Position Sensor (Hoist Control)
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0096 FMI 06 Level Sensor (Fuel) Current Above Normal - Test
966G Wheel Loader and 972G Wheel Loader Power Train Modulating Valve (Transmission Clutch)
583R Pipelayer Machine Systems Winch Drive Motor - Install
773D Off-Highway Truck and 775D Quarry Truck Towing the Machine
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Position Sensor (Dump Body)
583R Pipelayer Machine Systems Winch Drive Motor - Disassemble
980G Wheel Loader Power Train Electronic Control Module (Power Train) - Remove and Install
583R Pipelayer Machine Systems Winch Drive Motor - Assemble
D250E Series II and D300E Series II Articulated Trucks Power Train Torque Converter and Retarder - Separate
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Water Temperature Regulator - Remove and Install
3306C Engines for Caterpillar Built Machines Flywheel