Electronic Control Module (Power Train) - Remove and Install
Removal Procedure
Start By:
- Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect" for the machine that is being serviced.
Note: The electronic control module is located inside the cab. Put identification marks on all connectors for installation purposes.
- Remove three bolts (1) and access panel (2) .
Show/hide table
Illustration 1 | g00312804 |
Right Side |
- Remove bolts (4) .
Show/hide table
Illustration 2 | g00312805 |
- Disconnect electrical connectors (6) from power train electronic control (5) .
- Remove four bolts (3) .
- Remove power train electronic control (5) .
Installation Procedure
- Install power train electronic control (5) .
Show/hide table
Illustration 3 | g00312805 |
- Install four bolts (3) .
- Connect electrical connectors (6) from power train electronic control (5) .
- Install bolts (4) .
- Install access panel (2) and three bolts (1) .
Show/hide table
Illustration 4 | g00312804 |
End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect" for the machine that is being serviced.
Caterpillar Information System:
583R Pipelayer Machine Systems Winch Drive Motor - Disassemble
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Position Sensor (Dump Body)
773D Off-Highway Truck and 775D Quarry Truck Towing the Machine
583R Pipelayer Machine Systems Winch Drive Motor - Install
966G Wheel Loader and 972G Wheel Loader Power Train Modulating Valve (Transmission Clutch)
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0096 FMI 06 Level Sensor (Fuel) Current Above Normal - Test
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Position Sensor (Hoist Control)
769D Off-Highway Truck and 771D Quarry Truck Leaving the Machine
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Air Cleaner - Remove and Install
583R Pipelayer Machine Systems Winch Drive Motor - Remove
769D Off-Highway Truck and 771D Quarry Truck Stopping the Engine
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Steering Frame Lock - Separate and Connect
583R Pipelayer Machine Systems Winch Drive Motor - Assemble
D250E Series II and D300E Series II Articulated Trucks Power Train Torque Converter and Retarder - Separate
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Water Temperature Regulator - Remove and Install
3306C Engines for Caterpillar Built Machines Flywheel
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Aftercooler - Remove and Install
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Air Cleaner - Remove and Install
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Alternator - Remove and Install
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Electric Starting Motor - Remove and Install
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Engine - Install
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Engine - Remove
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Transfer Gearbox - Install
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Engine Cover - Remove and Install