Illustration 1 | g00701138 |
Speedometer/Tachometer module (1) Tachometer (2) Pictograph symbol (3) Ground speed readout (4) Actual gear readout (5) Harness Connector |
Ground speed readout (3) consists of three digits that may be used in order to show the machine ground speed in "MPH (km/h)". The service program code of "UN" is used to change the unit of measure. The unit of measure is English or metric. The VIMS calculates speed by using the information from the output of a frequency sensor. The VIMS may also calculate speed by using information that is obtained from a different electronic control over the CAT data link.
Actual gear readout (4) consists of two digits that show the transmission actual gear which is engaged. The left digit shows the actual gear that is selected, "1", "2", "3", etc. The right digit shows the direction that is selected, "F", "N" or "R".
Tachometer (1) shows the engine speed in RPM. The VIMS calculates speed by using the information from the output of a frequency sensor. The VIMS may also calculate speed by using information that is obtained from a different electronic control over the CAT data link.